On Tue, Jan 12, 2016 at 06:31:13PM +0100, Hector Oron wrote: > chronyc> sources > 210 Number of sources = 4 > MS Name/IP address Stratum Poll Reach LastRx Last sample > =============================================================================== > ^? der.beste.tiger.ist.sidne 2 8 1 69 -72527m[-72527m] +/- > 41ms > ^? ns3.customer-resolver.net 2 8 1 74 -72527m[-72527m] +/- > 42ms > ^? net2.uni-paderborn.de 1 8 1 74 -72527m[-72527m] +/- > 29ms > ^? trabant.uid0.hu 4 8 1 74 -72527m[-72527m] +/- > 19ms
Reach is 1, which means it has only one sample. It needs 3 samples (reach 7) before it can update the clock and make a step. With the chronyc sourcestats command you can see the number of samples directly in the NP column. > chronyc> tracking > Reference ID : 127.127.1.1 () > Stratum : 10 > Ref time (UTC) : Mon Nov 23 08:39:06 2015 > System time : 0.000000000 seconds slow of NTP time > Last offset : +0.000000000 seconds > RMS offset : 0.000000000 seconds > Frequency : 0.930 ppm slow > Residual freq : +0.000 ppm > Skew : 0.000 ppm > Root delay : 0.000000 seconds > Root dispersion : 0.000001 seconds > Update interval : 0.0 seconds > Leap status : Not synchronised The Leap status should be "Normal". > If I wait >17 minutes for chronyd to collect measurements results and > do a makestep, it does not seem to bring time to actual either. > activity command reports sources are online. Hm, with minpoll 8 (256 seconds) chronyd should have 3 samples per source after about 9 minutes, so I'm not sure why 17 minutes is not enough. -- Miroslav Lichvar -- To unsubscribe email chrony-users-requ...@chrony.tuxfamily.org with "unsubscribe" in the subject. For help email chrony-users-requ...@chrony.tuxfamily.org with "help" in the subject. Trouble? Email listmas...@chrony.tuxfamily.org.