No I tested it on ordinary x64 kernel (4.9 , 3.16 etc..) coming from debian
& fc repos with no custom options.
I just installed pps-linux and invoked 'ldattach 18 /dev/ttyS0' (which also
loads pps_ldisc module) , maybe i'm missing something ?
2017-08-30 18:51 GMT+02:00 Miroslav Lichvar <mlich...@redhat.com>:
> On Tue, Aug 29, 2017 at 04:58:14PM +0200, Thibaut BEYLER wrote:
> > > #* PPS0 0 4 377 11
> > >> +/- 3021ns
> > > PPS0 23 17 383 +0.001 0.052
> > >> +5ns 5548ns
> > I am using pps_ldisc, i tried pps-gpio but it was not better.
> > I am using a custom serial cable (pin 1 of the serial cable is linked to
> > the bnc ouput on the gps timeserver), same setup had given good results
> > using an other software.
> The chronyc output suggests the PPS input is very jittery. What
> architecture is that? If it has GPIO I'd assume it's not just an
> ordinary x86_64 computer. Also, what kernel version is it running? Is
> the NOHZ config option enabled? Disabling it with nohz=off might help.
> Miroslav Lichvar
> To unsubscribe email chrony-users-requ...@chrony.tuxfamily.org
> with "unsubscribe" in the subject.
> For help email chrony-users-requ...@chrony.tuxfamily.org
> with "help" in the subject.
> Trouble? Email listmas...@chrony.tuxfamily.org.