Hi,
under ntpd - following command "ntpq -4p" produces in my setup follwoing output:
# ntpq -4premote refid st t when poll reach delay offset jitter
============================================================================== *ntp1.m-online.n 212.18.1.106 2 u 395 1024 377 25.932 0.693 1.653 +ntp2.m-online.n 212.18.1.106 2 u 871 1024 377 24.302 0.440 0.549 My question, with chronyc, is there a possibility to get the ip address like the refid under "ntpq -4p" too. With "chronyc ntpdata ntp1.m-online.net" - only a HEX - "Reference ID : D412016A ()" will be shown, but NOT the ip address behind the "Reference ID : D412016A ()" - like under "ntpq -4p". Thank you in advance! Klaus. -- --------------------------------------- e-Mail : [email protected] Homepage: https://www.tachtler.net DokuWiki: https://dokuwiki.tachtler.net ---------------------------------------
binozTeNR4sIP.bin
Description: Öffentlicher PGP-Schlüssel
