HI all: In the scenario where multiple clock sources are configured, we encounter some problems. One IPv4 server and one IPv6 server are the clock source of local stratum 10. As I mentioned last time, the two servers are generated by different hosts using network namespaces. The command output shows that the status of the clock source is maybe in error. [root@localhost ~]# chronyc sources -a -v
.-- Source mode '^' = server, '=' = peer, '#' = local clock. / .- Source state '*' = current best, '+' = combined, '-' = not combined, | / 'x' = may be in error, '~' = too variable, '?' = unusable. || .- xxxx [ yyyy ] +/- zzzz || Reachability register (octal) -. | xxxx = adjusted offset, || Log2(Polling interval) --. | | yyyy = measured offset, || \ | | zzzz = estimated error. || | | \ MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^x 11.11.99.134 10 1 377 2 -842ms[ -842ms] +/- 81us ^x 1111:1111::1:7e0d 10 1 377 0 +86ms[ +86ms] +/- 127us When trust is configured for only one clock source, current best is displayed, and X is displayed for the other clock source. [root@localhost ~]# chronyc sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^x 11.11.54.34 10 1 377 1 -674ms[ -674ms] +/- 79us ^* 1111:1111::1:f9f 10 1 377 0 +8459ns[ +19us] +/- 121us Configure two trusts and change them to X at the same time. The two clock sources marked as trust do not respond to each other. Therefore, both clock sources are displayed as false clock sources. [root@localhost ~]# chronyc sources -a -v .-- Source mode '^' = server, '=' = peer, '#' = local clock. / .- Source state '*' = current best, '+' = combined, '-' = not combined, | / 'x' = may be in error, '~' = too variable, '?' = unusable. || .- xxxx [ yyyy ] +/- zzzz || Reachability register (octal) -. | xxxx = adjusted offset, || Log2(Polling interval) --. | | yyyy = measured offset, || \ | | zzzz = estimated error. || | | \ MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^x 11.11.93.143 10 1 77 0 -325ms[ -325ms] +/- 90us ^x 1111:1111::1:753d 10 1 77 0 +678ms[ +678ms] +/- 130us If two IPv4 local clock sources are used and the trust command is used, both clock sources can be displayed properly. [cid:image001.png@01D9089E.FDBB5D30] [cid:image002.png@01D9089E.FDBB5D30] I wonder what the difference is? The IPv4 namespace is on the 9.82.168.154 host, and the IPv6 namespace is on the 9.82.203.28 host.
