Well i don't have a model number on my board, or from the ad i bought it on
ebay.But here's a picture of itif there's some info you can glean from this ad
on ebay, take a look:WWVB/60KHz Receiver Module Radio Time Module Radio Clock
Radio Module Antenna | eBay
|
|
|
| | |
|
|
|
| |
WWVB/60KHz Receiver Module Radio Time Module Radio Clock Radio Module An...
Nominal frequency: 60KHz±300Hz. • Receiving frequency: 60KHz. ⇒ DCF receiver
module with antenna. Antenna size: ...
|
|
|
On Wednesday, October 23, 2024 at 12:45:33 PM CDT, w...@comcast.net
<w...@comcast.net> wrote:
IIRC they changed the modulation scheme to get wider coverage at the expense of
timing accuracy. Between that and the ready availability of GPS receivers, WWVB
fell out of favor in the timing community.
It’s still well used for setting alarm clocks, et. al.
-wis
From: Steven Sommars <stevesommars...@gmail.com>
Sent: Wednesday, October 23, 2024 8:05 AM
To: chrony-users@chrony.tuxfamily.org
Subject: Re: [chrony-users] Re: Any nice example of chrony, WWVB, Raspberry Pi ?
I haven't seen any NTP Stratum 1 servers with Ref ID=WWVB for years. Current
WWVB radios seem to lack a PPS output.
On Wed, Oct 23, 2024 at 1:53 AM Miroslav Lichvar <mlich...@redhat.com> wrote:
On Wed, Oct 23, 2024 at 01:58:56AM +0000, Mike Collins wrote:
> Any ideas where to look ?I'm not actually quite sure i have everything
>implemented correctly, but I did as best i could find, on the web, and nothing
>had an example with a WWVB board.Everything was GPS based.
I missed the fact that it's not GPS.
What WWVB board do you have? I don't have any experience with WWVB. We
have DCF77 around here. There is a lot of noise in that part of the
spectrum. The receiver/decoder needs to be have its own clock to be
able to provide a stable PPS signal and reconstruct the messages
reliably. It cannot compete with GPS, but I think it should have
better stability than 10s of milliseconds.
--
Miroslav Lichvar
--
To unsubscribe email chrony-users-requ...@chrony.tuxfamily.org
with "unsubscribe" in the subject.
For help email chrony-users-requ...@chrony.tuxfamily.org
with "help" in the subject.
Trouble? Email listmas...@chrony.tuxfamily.org.
