Autotest `tst_qnmeapositioninfosource_simulation' failed :(
The test was determined to be flaky, meaning results were not consistent across
multiple runs. This might make the problem difficult to reproduce. Also,
flaky failures might or might not be related to any recent changes in the
source code.
Testing tst_QNmeaPositionInfoSource_Simulation
FAIL! :
tst_QNmeaPositionInfoSource_Simulation::requestUpdate_waitForValidDateTime(Feed
GGA,RMC,GGA; expect RMC, second GGA only) Compared values are not the same
Actual (spy.count()): 0
Expected (1) : 1
..\tst_qnmeapositioninfosource.cpp(415) : failure location
Totals: 25 passed, 1 failed, 0 skipped
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
********* Start testing of tst_QNmeaPositionInfoSource_Simulation *********
Config: Using QtTest library 5.2.0, Qt 5.2.0
PASS : tst_QNmeaPositionInfoSource_Simulation::initTestCase()
PASS : tst_QNmeaPositionInfoSource_Simulation::constructor()
PASS : tst_QNmeaPositionInfoSource_Simulation::supportedPositioningMethods()
PASS : tst_QNmeaPositionInfoSource_Simulation::minimumUpdateInterval()
PASS :
tst_QNmeaPositionInfoSource_Simulation::setUpdateInterval_delayedUpdate()
PASS : tst_QNmeaPositionInfoSource_Simulation::lastKnownPosition()
PASS :
tst_QNmeaPositionInfoSource_Simulation::beginWithBufferedData(startUpdates(), 1
update in buffer)
PASS :
tst_QNmeaPositionInfoSource_Simulation::beginWithBufferedData(requestUpdate(),
1 update in buffer)
PASS :
tst_QNmeaPositionInfoSource_Simulation::beginWithBufferedData(startUpdates(),
multiple updates in buffer)
PASS :
tst_QNmeaPositionInfoSource_Simulation::beginWithBufferedData(requestUpdate(),
multiple updates in buffer)
PASS : tst_QNmeaPositionInfoSource_Simulation::startUpdates(1 update)
PASS : tst_QNmeaPositionInfoSource_Simulation::startUpdates(2 updates)
PASS : tst_QNmeaPositionInfoSource_Simulation::startUpdates(10 updates)
QWARN : tst_QNmeaPositionInfoSource_Simulation::startUpdates_withTimeout()
QNmeaPositionInfoSource: no QIODevice data source, call setDevice() first
FAIL! : tst_QNmeaPositionInfoSource_Simulation::startUpdates_withTimeout()
Compared values are not the same
Actual (spyUpdate.count()): 0
Expected (j) : 1
..\tst_qnmeapositioninfosource.cpp(272) : failure location
PASS :
tst_QNmeaPositionInfoSource_Simulation::startUpdates_expectLatestUpdateOnly()
PASS :
tst_QNmeaPositionInfoSource_Simulation::startUpdates_waitForValidDateTime(Feed
GGA,RMC,GGA; expect RMC, second GGA only)
PASS :
tst_QNmeaPositionInfoSource_Simulation::startUpdates_waitForValidDateTime(Feed
GGA,ZDA,GGA; expect second GGA only)
PASS :
tst_QNmeaPositionInfoSource_Simulation::startUpdates_waitForValidDateTime(Feed
good RMC, RMC with bad date/time, good RMC; expect first and third RMC only)
PASS :
tst_QNmeaPositionInfoSource_Simulation::requestUpdate_waitForValidDateTime(Feed
GGA,RMC,GGA; expect RMC, second GGA only)
PASS :
tst_QNmeaPositionInfoSource_Simulation::requestUpdate_waitForValidDateTime(Feed
GGA,ZDA,GGA; expect second GGA only)
PASS :
tst_QNmeaPositionInfoSource_Simulation::requestUpdate_waitForValidDateTime(Feed
good RMC, RMC with bad date/time, good RMC; expect first and third RMC only)
PASS : tst_QNmeaPositionInfoSource_Simulation::requestUpdate()
PASS : tst_QNmeaPositionInfoSource_Simulation::requestUpdate_after_start()
PASS :
tst_QNmeaPositionInfoSource_Simulation::testWithBadNmea(requestUpdate(), bad
second sentence)
QWARN :
tst_QNmeaPositionInfoSource_Simulation::testWithBadNmea(startUpdates(), bad
second sentence) QNmeaPositionInfoSource: no QIODevice data source, call
setDevice() first
FAIL! :
tst_QNmeaPositionInfoSource_Simulation::testWithBadNmea(startUpdates(), bad
second sentence) Compared values are not the same
Actual (spy.count()) : 0
Expected (dateTimes.count()): 2
..\tst_qnmeapositioninfosource.cpp(511) : failure location
PASS : tst_QNmeaPositionInfoSource_Simulation::cleanupTestCase()
Totals: 24 passed, 2 failed, 0 skipped
********* Finished testing of tst_QNmeaPositionInfoSource_Simulation *********
QtQA::App::TestRunner: test failed on first and second attempts, but with
different behavior each time:
QtQA::App::TestRunner: first attempt: exited with exit code 1
QtQA::App::TestRunner: second attempt: exited with exit code 2
QtQA::App::TestRunner: the test seems to be flaky, please fix this
QtQA::App::TestRunner: this flaky test is being treated as a FAIL
QtQA::App::TestRunner: end tst_qnmeapositioninfosource_simulation: 85
seconds, exit code 2
Build log:
http://testresults.qt-project.org/ci/QtLocation_release_Integration/build_00003/win64-msvc2012_developer-build_qtnamespace_Windows_8/log.txt.gz
Tested changes (refs/builds/release_1384789548):
http://codereview.qt-project.org/71575 [PS1] - Fix install path for examples
http://codereview.qt-project.org/71574 [PS1] - Fix qdoc references
following shift of example dirs
http://codereview.qt-project.org/71562 [PS1] - Doc: Update .qdocconf to
match example folder structure
_______________________________________________
Ci-reports mailing list
[email protected]
http://lists.qt-project.org/mailman/listinfo/ci-reports
