actually, I think for current time jsut commented bluray.m2ts opts file should work.... with just struct bd_format expansion, because I don't know how to add correctly line or two inside already-read opts file (my x264-opts editing was not accepted by ffmpeg)
---------- Пересланное сообщение ---------- Тема: Re: [Cin] Blu-ray encoding again Дата: Суббота 16 ноября 2019 Отправитель: Andrew Randrianasulu <[email protected]> Получатель: "Cinelerra.GG" <[email protected]> В сообщении от Friday 15 November 2019 02:40:35 Phyllis Smith написал(а): > Andrew: > > File I used for test was named 1080p25.ts and I found it ... > > http://www.w6rz.net/1080p25.zip here > > > > Thanks for this test file. I have been testing the bluray.m2ts that you > provided off and on all day. Everything seems to work just fine on our > bluray burner and when played on the bluray player connected to the TV. > The fake-interlaced=1 parameter was quite intriguing so at least once, I > was able to get a failure with the provided media when I left out this fake > parameter. So I guess it really does what it says it does! So this opts > file will get checked in with, as always, a few gg tweaks. Thanks, > Phyllis/gg > I tried to patch bdcreate.C but while it worked I'm sure i did it wrong (and you need to fix keyint by hand anyway): cat /dev/shm/bdcreate.patch diff --git a/cinelerra-5.1/cinelerra/bdcreate.C b/cinelerra-5.1/cinelerra/bdcreate.C index 863c5d0..fdafa5c 100644 --- a/cinelerra-5.1/cinelerra/bdcreate.C +++ b/cinelerra-5.1/cinelerra/bdcreate.C @@ -44,6 +44,7 @@ static struct bd_format { { "1920x1080 29.97p*", 1920,1080, 29.97, 1, ILACE_MODE_NOTINTERLACED }, { "1920x1080 24p", 1920,1080, 24., 1, ILACE_MODE_NOTINTERLACED }, { "1920x1080 25i", 1920,1080, 25., 1, ILACE_MODE_TOP_FIRST }, + { "1920x1080 25p", 1920,1080, 25., 1, ILACE_MODE_NOTINTERLACED }, { "1920x1080 23.976p", 1920,1080, 23.976, 1, ILACE_MODE_NOTINTERLACED }, { "1440x1080 29.97i", 1440,1080, 29.97, -1, ILACE_MODE_TOP_FIRST }, { "1440x1080 25i", 1440,1080, 25., -1, ILACE_MODE_TOP_FIRST }, @@ -51,6 +52,8 @@ static struct bd_format { { "1440x1080 23.976p", 1440,1080, 23.976,-1, ILACE_MODE_NOTINTERLACED }, { "1280x720 59.94p", 1280,720, 59.94, 1, ILACE_MODE_NOTINTERLACED }, { "1280x720 50p", 1280,720, 50., 1, ILACE_MODE_NOTINTERLACED }, + { "1280x720 29.97p", 1280,720, 29.97, 1, ILACE_MODE_NOTINTERLACED }, + { "1280x720 25p", 1280,720, 25., 1, ILACE_MODE_NOTINTERLACED }, { "1280x720 24p", 1280,720, 24., 1, ILACE_MODE_NOTINTERLACED }, { "1280x720 23.976p", 1280,720, 23.976, 1, ILACE_MODE_NOTINTERLACED }, { "720x576 25i", 720,576, 25., 0, ILACE_MODE_BOTTOM_FIRST }, @@ -325,11 +328,23 @@ int CreateBD_Thread::create_bd_jobs(ArrayList<BatchRenderJob*> *jobs, const char FFMPEG::set_option_path(option_path, "video/%s", asset->vcodec); FFMPEG::load_options(option_path, asset->ff_video_options, sizeof(asset->ff_video_options)); - const char *opts = 0; + char *opts = 0; + char *opts1 = 0; switch( asset->interlace_mode ) { case ILACE_MODE_TOP_FIRST: opts = ":tff\n"; break; case ILACE_MODE_BOTTOM_FIRST: opts = ":bff\n"; break; } + + if ((asset->width == 1920) && (asset->height == 1080) && (asset->frame_rate != 24) && (asset->interlace_mode==ILACE_MODE_NOTINTERLACED)) + opts1="fake-interlaced=1\n"; + if ((asset->width == 1280) && (asset->height == 720) && (asset->frame_rate == 25 || asset->frame_rate == 29.97 ) && (asset->interlace_mode==ILACE_MODE_NOTINTERLACED)) + opts1="pulldown=double\n"; + + if ((opts1) && (opts)) { + int len1 = strlen(opts); + char *cp1 = opts + len1-1; + strncpy(cp1, opts1, sizeof(opts)-len1); + } if( opts ) { int len = strlen(asset->ff_video_options); char *cp = asset->ff_video_options + len-1; -------------------------------------------------------
bluray libx264 bluray-compat=1 id=0x1011 level=41 bf=2 # set for 1080p/25 and 1080p/29.97 fake-interlaced=1 # set for 720p 29.97 and 25 pulldown=double # bitrate=40000 slices=4 sar=1:1 # vbv-maxrate=40000 # vbv-bufsize=30000 refs=3 cin_pix_fmt=yuv420p color_range=mpeg colorspace=bt709 color_trc=bt709 color_primaries=bt709 profile=high preset=medium flags=+cgop # must be last for bdcreate.C # set keyint= to your BD type framerate setting manually! x264opts keyint=25:min-keyint=4:qpmin=3:qpmax=33:qp_step=4:merange=8:vbv-maxrate=40000:vbv-bufsize=30000
-- Cin mailing list [email protected] https://lists.cinelerra-gg.org/mailman/listinfo/cin
