Den 08.02.2023 02:38, skrev Andrew Randrianasulu:
ср, 8 февр. 2023 г., 04:08 Terje J. Hanssen <[email protected]>: Den 08.02.2023 00:52, skrev Andrew Randrianasulu:ср, 8 февр. 2023 г., 01:35 Terje J. Hanssen via Cin <[email protected]>: Den 02.02.2023 01:46, skrev Terje J. Hanssen:.......but I prepare myself to test and use one method left with regards to "Personal Video Archiving". Therefore I have ordered two selected, inexpensive devices (the urls here are just for English language): 1) Capture Card USB HDMI 4K to 1080P USB-C adapter (Speedy USB 3.2/3.1/3.0, 60 Hz and 1080p FHD.) https://www.turascandinavia.com/en/products/computer/microphone-webcam/webcams/74257 * Fluid video recordings without delays or distortions during live streaming * Linux not mentioned, but assumed this is a standard supported UVC. OBS and VLC is mentioned.Then the first item, Hama Video Recording Stick, HDMI 4k - USB3.x is received. It promises: "Fluid video recordings without delays or distortions during live streaming, thanks to a picture frequency of 60 Hz and 1080p with Full HD. Transform high-quality video cameras into a high-resolution USB web camera". I have done a quick, first test using my Sony HDR-FX7E camera. This is a HDV 1080i camcorder with MPEG-2 video compression at 25 mbps on tape 1440x1080, 50i25fps, 4:2:0 and MP2 stereo audio. Currently it's cassette deck is broken and needs repair service. But according to Steve Mullen's V1 and FX7 handbook (not mentioned in the manual): 1. When the camera is operating, the EIP (Enhanced Image Processor) generates uncompressed 1440x1080i with a 4:2:2 color space. Digital 4:2:2 data are output via the HDMI port while 4:2:2 analog is output via component-out. Therefore, you can record 4:2:2 live HD video from the camera without MPEG-2 compression. V1 and FX7 provide an HDMI output port that carries uncompressed 4:2:2, 8-bit, digital video plus dual-channel, PCM, 16-bit, 48kHz audio When the camera is running. 2. If you are playing a 1080i50 or 1080i60 HDV tape. The 4:2:0 MPEG-2 is decoded and chroma up-scaled to a 4:2:2. The HDMI chip downscales 1440 to 1280 while it up-scales 540 to 720. The result is 720p50 or 720p60, which is output via HDMI. That is, I have tested section 1 now, but see now that I didn't test 1440x1080 resolution. The only resolution I got to work at 25 fps was 720x576 (SD), while HD 1280x720 and FHD 1920x1080 were set down to 10 fps and 5 fps respectively by the driver and caused jumpy playback. Did you tried to force specific format (uncompressed) before -i parameter for ffmpeg?Just "-framerate 25 -video_size 1920x1080" before -i as repeated in the code as follows, where I tested to encode to uncompressed v210 instead of ffv1, but with no change with regards to low 5 fps: ffmpeg -hide_banner -f v4l2 -framerate 25 -video_size 1920x1080 -i /dev/video0 -codec:v v210 -codec:a pcm_s16le -f matroska 1920x1080_v210.mkv [video4linux2,v4l2 @ 0x55944900e0c0] The driver changed the time per frame from 1/25 to 1/5 I also read a related issue and reply to this post at Superuser, where 1920x1080 was not supported on the webcam. https://superuser.com/questions/1449252/ffmpeg-captures-from-uvc-dev-video0-in-any-resolution-except-for-1920x1080Also look out for usb2 vs usb3 ports? Shouldn't capture device hang on bus 002 (usb 3.0) root hub, instead of bus 001 (usb 2.0 root hub), from lsusb below?This may well work better. I have to admit that I have never studied the difference between shared usb buses. My thought was to try to change the connected usb devices, but tested first the only free usb3 port (blue) on the add-on frontpanel of the workstation. The other two usb3 ports are on the backpanel and are used for the Asus blu-ray burner and 8TB Seagate expansion video disc. The other usb ports on both panels are usb2 ports, whereof two for the wireless keyboard and mouse on the fronpanel. What I possibly already have mentioned before, is that sometimes if I connect a usb(2) device or memory to the usb3 port on the frontpanel, this cause hang on the keyboard or mouse. But this didn't happend this time with the USB3 capture stick.Someone here that have suggestion to possibly modified syntax or can verify that the driver doesn't manage this? Another (setup) problem, there was no audio recorded or heard during playback!? In the following I list the test command syntax I've collectedf and tried with shortened output (yet long): To explain, I have also another USB 2.0 Webcam connected, beside the new HDMI-USB3 Videstick. Verify the devices, drivers and formats: --------------------------------------- dmesg | tail [22706.060759] perf: interrupt took too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 [32105.561575] perf: interrupt took too long (3158 > 3151), lowering kernel.perf_event_max_sample_rate to 63250 [40586.477420] usb 1-5: USB disconnect, device number 2 [40599.099612] usb 1-5: new high-speed USB device number 5 using xhci_hcd [40599.250960] usb 1-5: New USB device found, idVendor=534d, idProduct=2109, bcdDevice=21.00 [40599.250972] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [40599.250978] usb 1-5: Product: USB Video [40599.250984] usb 1-5: Manufacturer: MACROSILICON [40599.252310] usb 1-5: Found UVC 1.00 device USB Video (534d:2109) [40599.256234] hid-generic 0003:534D:2109.0006: hiddev96,hidraw0: USB HID v1.10 Device [MACROSILICON USB Video] on usb-0000:00:14.0-5/input4 ----------------------------- lsusb Bus 002 Device 003: ID 05e3:0732 Genesys Logic, Inc. All-in-One Cardreader Bus 002 Device 002: ID 0bc2:2038 Seagate RSS LLC Expansion HDD Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 046d:c534 Logitech, Inc. Unifying Receiver Bus 001 Device 005: ID 534d:2109 MacroSilicon USB Video Bus 001 Device 004: ID 0c45:6340 Microdia Camera Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub udevadm info /dev/video* | egrep 'DEVNAME|ID_V4L_PRODUCT' E: DEVNAME=/dev/video0 E: ID_V4L_PRODUCT=USB Video: USB Video E: DEVNAME=/dev/video1 E: ID_V4L_PRODUCT=USB Video: USB Video E: DEVNAME=/dev/video2 E: ID_V4L_PRODUCT=USB 2.0 Camera: HD 720P Webcam E: DEVNAME=/dev/video3 E: ID_V4L_PRODUCT=USB 2.0 Camera: HD 720P Webcam lsusb | egrep 'Video|Camera' Bus 001 Device 005: ID 534d:2109 MacroSilicon USB Video Bus 001 Device 004: ID 0c45:6340 Microdia Camera -------------------- ll /dev/video* crw-rw----+ 1 root video 81, 0 feb. 7 20:22 /dev/video0 crw-rw----+ 1 root video 81, 1 feb. 7 20:22 /dev/video1 crw-rw----+ 1 root video 81, 2 feb. 7 09:05 /dev/video2 crw-rw----+ 1 root video 81, 3 feb. 7 09:05 /dev/video3 ----------------------- v4l2-ctl --list-devices USB 2.0 Camera: HD 720P Webcam (usb-0000:00:14.0-11): /dev/video2 /dev/video3 USB Video: USB Video (usb-0000:00:14.0-5): /dev/video0 /dev/video1 ------------------------- ffmpeg -f v4l2 -list_formats all -i /dev/video0 ffmpeg -hide_banner -f v4l2 -list_formats all -i /dev/video0 [video4linux2,v4l2 @ 0x556cf63570c0] Compressed: mjpeg : Motion-JPEG : 1920x1080 1600x1200 1360x768 1280x1024 1280x960 1280x720 1024x768 800x600 720x576 720x480 640x480 [video4linux2,v4l2 @ 0x556cf63570c0] Raw : yuyv422 : YUYV 4:2:2 : 1920x1080 1600x1200 1360x768 1280x1024 1280x960 1280x720 1024x768 800x600 720x576 720x480 640x480 /dev/video0: Immediate exit requested ffmpeg -hide_banner -f v4l2 -list_formats all -i /dev/video1 [video4linux2,v4l2 @ 0x5560c0bc70c0] ioctl(VIDIOC_G_INPUT): Inappropriate ioctl for device /dev/video1: Inappropriate ioctl for device ---------------- v4l2-ctl --all Driver Info (not using libv4l2): Driver name : uvcvideo Card type : USB Video: USB Video Bus info : usb-0000:00:14.0-5 Driver version: 5.14.21 Capabilities : 0x84A00001 Video Capture Metadata Capture Streaming Extended Pix Format Device Capabilities Device Caps : 0x04200001 Video Capture Streaming Extended Pix Format Priority: 2 Video input : 0 (Camera 1: ok) Format Video Capture: Width/Height : 1920/1080 Pixel Format : 'MJPG' Field : None Bytes per Line : 0 Size Image : 4147200 Colorspace : sRGB Transfer Function : Rec. 709 YCbCr/HSV Encoding: ITU-R 601 Quantization : Default (maps to Full Range) Flags : Crop Capability Video Capture: Bounds : Left 0, Top 0, Width 1920, Height 1080 Default : Left 0, Top 0, Width 1920, Height 1080 Pixel Aspect: 1/1 Selection: crop_default, Left 0, Top 0, Width 1920, Height 1080 Selection: crop_bounds, Left 0, Top 0, Width 1920, Height 1080 Streaming Parameters Video Capture: Capabilities : timeperframe Frames per second: 30.000 (30/1) Read buffers : 0 brightness 0x00980900 (int) : min=-128 max=127 step=1 default=-11 value=-11 contrast 0x00980901 (int) : min=0 max=255 step=1 default=148 value=148 saturation 0x00980902 (int) : min=0 max=255 step=1 default=180 value=180 hue 0x00980903 (int) : min=-128 max=127 step=1 default=0 value=0 ----------------- v4l2-ctl --list-formats-ext ioctl: VIDIOC_ENUM_FMT Index : 0 Type : Video Capture Pixel Format: 'MJPG' (compressed) Name : Motion-JPEG Size: Discrete 1920x1080 Interval: Discrete 0.017s (60.000 fps) Interval: Discrete 0.033s (30.000 fps) Interval: Discrete 0.040s (25.000 fps) Interval: Discrete 0.050s (20.000 fps) Interval: Discrete 0.100s (10.000 fps) ......... Size: Discrete 1280x720 Interval: Discrete 0.017s (60.000 fps) Interval: Discrete 0.020s (50.000 fps) Interval: Discrete 0.033s (30.000 fps) Interval: Discrete 0.050s (20.000 fps) Interval: Discrete 0.100s (10.000 fps) ...... Size: Discrete 720x576 Interval: Discrete 0.017s (60.000 fps) Interval: Discrete 0.020s (50.000 fps) Interval: Discrete 0.033s (30.000 fps) Interval: Discrete 0.050s (20.000 fps) Interval: Discrete 0.100s (10.000 fps)well, it seems we know by now why this device was ...unexpensive.
Yes, I have a "90-days open order" and will start to search for another, better UVC video capture device. The problem is the lack of definitive specifications, compared with my proprietary BMD devices.
it really seems to report only 5-10 fps at fullHD uncompresed, anything bigger is mjpeg ...
Type : Video Capture Pixel Format: 'YUYV' Name : YUYV 4:2:2 Size: Discrete 1920x1080 Interval: Discrete 0.200s (5.000 fps) This can absolutely not be what they promote as:"Fluid video recordings without delays or distortions during live streaming, thanks to a picture frequency of 60 Hz and 1080p with Full HD".
https://superuser.com/questions/1449252/ffmpeg-captures-from-uvc-dev-video0-in-any-resolution-except-for-1920x1080
I also tried that link's suggested syntax|ffmpeg -y -t 15 -f video4linux2 -video_size 1920x1080 -input_format nv12 -timestamps abs -use_libv4l2 1 -i /dev/video0 out.mov|
but it didn't work for me, just quitted ffmpeg with Unrecognized option 'timestamps'. Error splitting the argument list: Option not foundLooking at ffmpeg man pages at https://manpages.org/ffmpeg/1 there also is a similar video4linux2 syntax example
Grab and record the input of a video4linux2 device, leave the frame rate and size as previously set: ffmpeg -f video4linux2 -input_format mjpeg -i /dev/video0 out.mpeg * video_size * Set the video frame size. The argument must be a string in the form WIDTHxHEIGHT or a valid size abbreviation. * pixel_format * Select the pixel format (only valid for raw video input). * input_format * Set the preferred pixel format (for raw video) or a codec name. This option allows one to select the input format, when several are available. But what should be set as input_format in this case?
Index : 1 Type : Video Capture Pixel Format: 'YUYV' Name : YUYV 4:2:2 Size: Discrete 1920x1080 Interval: Discrete 0.200s (5.000 fps) ...... Size: Discrete 1280x720 Interval: Discrete 0.100s (10.000 fps) ....... Size: Discrete 720x576 Interval: Discrete 0.040s (25.000 fps) Interval: Discrete 0.050s (20.000 fps) Interval: Discrete 0.100s (10.000 fps) Interval: Discrete 0.200s (5.000 fps) ......... Encoding: -------- ffmpeg -hide_banner -f v4l2 -framerate 25 -video_size 720x576 -i /dev/video0 -codec:v ffv1 -codec:a pcm_s16le -f matroska 720x576_ffv1.mkv ffmpeg -hide_banner -f v4l2 -framerate 25 -video_size 1280x720 -i /dev/video0 -codec:v ffv1 -codec:a pcm_s16le -f matroska 1280x720_ffv1.mkv [video4linux2,v4l2 @ 0x559d031190c0] The driver changed the time per frame from 1/25 to 1/10 ffmpeg -hide_banner -f v4l2 -framerate 25 -video_size 1920x1080 -i /dev/video0 -codec:v ffv1 -codec:a pcm_s16le -f matroska 1920x1080_ffv1.mkv [video4linux2,v4l2 @ 0x55ce18d060c0] The driver changed the time per frame from 1/25 to 1/5 ffmpeg -hide_banner -f v4l2 -framerate 25 -video_size 1920x1080 -i /dev/video0 -codec:v v210 -codec:a pcm_s16le -f matroska 1920x1080_v210.mkv [video4linux2,v4l2 @ 0x55944900e0c0] The driver changed the time per frame from 1/25 to 1/5 Recorded test video files and probing formats: --------------------------------------------- du -sh * 258M 1280x720_ffv1.mkv 292M 1920x1080_ffv1.mkv 1,1G 1920x1080_v210.mkv 61M 720x576_ffv1.mkv ----------------------------- ffprobe -hide_banner 720x576_ffv1.mkv Input #0, matroska,webm, from '720x576_ffv1.mkv': Metadata: ENCODER : Lavf58.76.100 Duration: 00:00:09.20, start: 0.000000, bitrate: 55385 kb/s Stream #0:0: Video: ffv1 (FFV1 / 0x31564646), yuv422p(tv, progressive), 720x576, 25 fps, 25 tbr, 1k tbn, 1k tbc (default) Metadata: ENCODER : Lavc58.134.100 ffv1 DURATION : 00:00:09.200000000 ----------- ffprobe -hide_banner 1280x720_ffv1.mkv Input #0, matroska,webm, from '1280x720_ffv1.mkv': Metadata: ENCODER : Lavf58.76.100 Duration: 00:00:38.90, start: 0.000000, bitrate: 55512 kb/s Stream #0:0: Video: ffv1 (FFV1 / 0x31564646), yuv422p(tv, progressive), 1280x720, 10 fps, 10 tbr, 1k tbn, 1k tbc (default) Metadata: ENCODER : Lavc58.134.100 ffv1 DURATION : 00:00:38.900000000 -------------- ffprobe -hide_banner 1920x1080_ffv1.mkv Input #0, matroska,webm, from '1920x1080_ffv1.mkv': Metadata: ENCODER : Lavf58.76.100 Duration: 00:00:53.40, start: 0.000000, bitrate: 45747 kb/s Stream #0:0: Video: ffv1 (FFV1 / 0x31564646), yuv422p(tv, progressive), 1920x1080, 5 fps, 5 tbr, 1k tbn, 1k tbc (default) Metadata: ENCODER : Lavc58.134.100 ffv1 DURATION : 00:00:53.400000000 ---------------- ffprobe -hide_banner 1920x1080_v210.mkv [matroska,webm @ 0x5563ca6d30c0] Stream #0: not enough frames to estimate rate; consider increasing probesize Input #0, matroska,webm, from '1920x1080_v210.mkv': Metadata: ENCODER : Lavf58.76.100 Duration: 00:00:41.40, start: 0.000000, bitrate: 221185 kb/s Stream #0:0: Video: v210 (v210 / 0x30313276), yuv422p10le(tv, progressive), 1920x1080, 5 fps, 1k tbr, 1k tbn, 1k tbc (default) Metadata: ENCODER : Lavc58.134.100 v210 DURATION : 00:00:41.400000000 ---------------------------2) Scart AV SV to HDMI Converter Switcher S Video Composite RCA DVD HD TV adapter (3-4 weeks delivery time https://www.ebay.com.au/itm/295472602625 * The 3-in-1 S-/video/RCA/SCART to HDMI converter is a universal converter for analog video input to HDMI output. * Analog to digital converter (ADC), 10 bits maximum 1,62 MSPS sampling, Q I have not yet found a definitiv ffmpeg FFV1 v 3 syntax guide for SD and HDV capturing and hope for suggestions and comments here!? 3.1 FFmpeg recipe (PAL) ffmpeg -i VIDEO_IN \ -c:v ffv1 -level 3 -coder 1 -context 0 -slices 24 -slicecrc 1 \ -color_primaries bt470bg \ -color_trc bt709 \ -colorspace bt470bg \ -color_range mpeg \ -map 0 \ -top 1 \ -c:a copy \ -g 1 -pix_fmt + \ VIDEO_OUT.mkv 3.2 Reference Example https://trac.ffmpeg.org/wiki/Encode/FFV1 Copy audio "as-is" and use FFV1.3 as video codec. Parameters are 8 threads, coder=1, context=1, GOP-size=1, 24 slices and slice-CRC on: ffmpeg -i <input_video> \ -acodec copy \ -vcodec ffv1 -level 3 \ -threads 8 \ -coder 1 \ -context 1 \ -g 1 \ -slices 24 \ -slicecrc 1 \ <output_video> 3.3 Various Encoding examples for Video capture from USB camera /dev/video0: ffmpeg -f v4l2 -framerate 25 -video_size 720x576 -i /dev/video0 output_data.mkv ffmpeg -f v4l2 -framerate 25 -video_size 720x576 -i /dev/video0 -codec:v ffv1 -codec:a pcm_s16le \ -f matroska output_video.mkv Check that video is captured properly using ffplay: ffmpeg -ar 44100 -thread_queue_size 1024 -f alsa -i $AUDIO \ -r 25 -thread_queue_size 1024 -i $VIDEO \ -codec copy -f matroska - | ffplay - Check the overall flow using ffplay before capturing: ffmpeg -ar 44100 -thread_queue_size 1024 -f alsa -i $AUDIO \ -itsoffset -0.5 -r 25 -thread_queue_size 1024 -i $VIDEO \ -filter_complex 'channelmap=FL-0' -filter_complex 'crop=w=700:h=556:x=8:y=0' \ -map 1:v -map 0:a -codec:v ffv1 -codec:a pcm_s16le \ -f matroska - | ffplay - 4, Regarding FFV1 lossless compression in realtime Comparison tests (2013/2015) have shown that FFV1 produced the smallest files at the fastest speed. It can be used to capture SD material in realtime, and HD possibly, too. This according to a 2012/2015 article, where I have extracted the results for FFV1 v.3 in the tables below: http://www.av-rd.com/knowhow/video/comparison_video_codecs_containers.html#codec_tests NOTE: This is a consumer grade, off-the-shelf PC setup. Hardware: CPU: Intel(R) QuadCore(TM) i7-2600K CPU @ 3.40GHz RAM: 8 GB Disk: Intel SSDSA2CW080G3 (SSD) Software: Operating System: GNU/Linux (Xubuntu 12.04.1, 64bit) Transcoding tool: FFmpeg (version git N-59183-g3e62654, Dec 17 2013) Video source file: VQEG reference video "football" <http://media.xiph.org/video/derf/y4m/football_422_ntsc.y4m> (NTSC-SD, 720x486px, 30fps, yuv422p, 8bpc) Codec Encoding Decoding Filesize % of uncompressed Implementation Details FFV1 <http://www.av-rd.com/knowhow/video/comparison_video_codecs_containers.html#codec_ffv1> (version 3) 216 fps 277 fps 111 MiB 46.1% libavcodec (FFmpeg) <http://en.wikipedia.org/wiki/Libavcodec> log <http://www.av-rd.com/knowhow/video/test_results/football-720x486i30/ffv1.3-libavcodec_ffmpeg_avi.log>, framemd5 <http://www.av-rd.com/knowhow/video/test_results/football-720x486i30/ffv1.3-libavcodec_ffmpeg_avi.framemd5> Video source file: SVT reference video "park joy" <http://media.xiph.org/video/derf/y4m/park_joy_1080p50.y4m> (full-HD/1080p, 1920x1080px, 50fps, yuv420p, 8bpc) Codec Encoding Decoding Filesize % of uncompressed Implementation Details FFV1 <http://www.av-rd.com/knowhow/video/comparison_video_codecs_containers.html#codec_ffv1> (version 3) 31 fps 63 fps 879 MiB 57.2% libavcodec (FFmpeg) <http://en.wikipedia.org/wiki/Libavcodec> log <http://www.av-rd.com/knowhow/video/test_results/park_joy-1920x1080p50/ffv1.3-libavcodec_ffmpeg_avi.log>, framemd5 <http://www.av-rd.com/knowhow/video/test_results/park_joy-1920x1080p50/ffv1.3-libavcodec_ffmpeg_avi.framemd5> PAL-SD 720x576 stored as YUV422, 10 bpc (bits per component), instead of the tested 8 bpc above, seems to me would have enlarged the the filesizes with about 25%, or to about 40 GB/hr with FFV1 lossless compressed. Although the FFV1 compression results above obviously used yuv422p, 8bps source SD and FHD files as input, it seems for me that the encoding speeds at 216 fps and 31 fps for SD and FHD respectively, assumingly should manage realtime FFV1 encoding and streaming of PAL SD and HDV at 25 fps as well, especially with a faster i7-6700 x 8 cpu. Comments here? 5. Related 2021-[Cin] threads as background references [Cin] hdmi capture card (with v4l2) https://www.mail-archive.com/[email protected]/msg02865.html [Cin] offtopic: Digitize and record Video with A/D USB adapters https://www.mail-archive.com/[email protected]/msg03269.html [Cin] offtopic: HDMI capture https://www.mail-archive.com/[email protected]/msg02084.html [Cin] Is SD and HD 422 Video Capture obtainable with V4L(2)? https://www.mail-archive.com/[email protected]/msg03719.html [Cin] Uncompressed video to lossless compression FFV1/MKV https://www.mail-archive.com/[email protected]/msg03791.html-- Cin mailing list[email protected] https://lists.cinelerra-gg.org/mailman/listinfo/cin
-- Cin mailing list [email protected] https://lists.cinelerra-gg.org/mailman/listinfo/cin
