Better late than never! When I have digitizing S-video to DV I have been disappointed about less color saturation and darker pictures on DV result playback.
Finishing Hi8 I just continued with VHS and vhsc digitizing, where red and green were even lesser and weak. What I now found out to my surprise is that it is really the MX-1/TBC that eats the colors in my work chain, and not as exspected the A/DV coversion. MX-1 has been known to include an effective, fullframe TBC, 8bit/422 brilliant color depth/sampling and 500 lines resolution, especially the better PAL version. It is also a video mixer with noise filter an a lot of effects like Chroma key. I have not found out if MX-1 can be set up with extended color saturation. But I had and have tested a Videotech Design VCC3010 high resolution (700 lines!) RGB color corrector and video processor, with no need to decode! A week ago I tested VCC3010 in front of MX-1, with no visible result.That is, MX-1 eat also these colors. But now when VCC3010 is connected after (behind) MX-1, the colors and saturation on DN-300 DV record loop/playback could be returned close to the analog source. Some will probably say colors can be added easy in the post. But I prefer also the digitalized sources with real correct colors. fre. 24. feb. 2023, 17:52 skrev Andrew Randrianasulu < [email protected]>: > > > пт, 24 февр. 2023 г., 14:25 Terje J. Hanssen <[email protected]>: > >> Happily, the DN-300 came back from the dead and is currently converting >> and recording S-video to DV again, though it somewhat fickly to get mounted >> "HDD enabled" via Firewire to Linux :). >> > > > \o/ I hope box will remain undead for at least as long as needed for all > works and tests :) > >> >> Den 19.02.2023 17:15, skrev Terje J. Hanssen: >> >> >> >> Den 19.02.2023 16:54, skrev Phyllis Smith: >> >> Terje, >> I can say with 100% certainty that here we have never tested FIREWIRE but >> I did notice that the CV contributors did add "ifdef FIREWIRE" in a few of >> the .C programs which conceivably means that it can be built with the >> capability. However, I guess I do not understand why you would want this >> option since you stated: >> "The reason is my 10 years old FireWire based DV/HDV recorder >> seemingly is dead." >> >> >> Sony FX7/HDV tape Playback/i.LINK -> Datavideo DN-300 DV/HDV HDD recorder >> -> FireWire/Linux WS >> >> Now when the M2T and DV recorder in the middle is dead, I have to >> transfer the files directly from the camcorder/player to the Linux WS. >> >> Terje >> >> >> Recently I successfully was able to do: "Transfer VHS/DVD Media or >> Video8/Hi8 Tapes into CINELERRA-GG" though. >> >>> Does this mean that Firewire/dv capture already is supported or optional >>>> can be configured? >>>> >>> >>> >>> it was not tested in ages ..... >>> guess try to install all -dev version of libraries and look at output of >>> cingg's configure .... then connect device and try to set capture device to >>> iec* .... >>> >>> >>> >> >>
-- Cin mailing list [email protected] https://lists.cinelerra-gg.org/mailman/listinfo/cin
