вс, 27 окт. 2024 г., 18:30 Terje J. Hanssen <[email protected]>:
> > > > Den 27.10.2024 16:21, skrev Andrew Randrianasulu: > > > > вс, 27 окт. 2024 г., 13:17 Terje J. Hanssen <[email protected]>: > >> >> >> >> Den 26.10.2024 01:37, skrev Andrew Randrianasulu: >> >> >> >> On Sat, Oct 26, 2024 at 2:14 AM Andrew Randrianasulu < >> [email protected]> wrote: >> >>> >>> >>> On Sat, Oct 26, 2024 at 1:29 AM Andrew Randrianasulu < >>> [email protected]> wrote: >>> >>>> >>>> >>>> сб, 26 окт. 2024 г., 00:58 Terje J. Hanssen <[email protected]>: >>>> >>>>> >>>>> >>>>> >>>>> Den 25.10.2024 21:48, skrev Andrew Randrianasulu: >>>>> >>>>> We branching! >>>>> >>>>> I looked at gpu-screen-recorder >>>>> >>>>> >>>>> https://git.dec05eba.com/gpu-screen-recorder/tree/src/encoder/video/vaapi.c >>>>> >>>>> it sets >>>>> >>>>> AVHWFramesContext *hw_frame_context = >>>>> (AVHWFramesContext*)frame_context->data; >>>>> hw_frame_context->width = video_codec_context->width; >>>>> hw_frame_context->height = video_codec_context->height; >>>>> hw_frame_context->sw_format = self->params.color_depth == >>>>> GSR_COLOR_DEPTH_10_BITS ? AV_PIX_FMT_P010LE : AV_PIX_FMT_NV12; >>>>> hw_frame_context->format = video_codec_context->pix_fmt; >>>>> hw_frame_context->device_ctx = >>>>> (AVHWDeviceContext*)self->device_ctx->data; >>>>> >>>>> so may be we need to set AV_PIX_FMT_P010LE and not just P010? >>>>> >>>>> >>>>> Sorry, It didn't render more than 8bit yuv420p >>>>> >>>> >>>> >>>> yeahh ... probably need more debugging (seeing what pixel format goes >>>> into ffmpeg vaapi interface at least). >>>> >>>> I only have decoding on nouveau, and quite flaky at that - only 2 files >>>> so far worked w,/o crashing, from around 2011/12. >>>> >>>> >>>> I tried to change two instances of NV12 to P010LE and it shows no >>>> visible effect, so I assume it was supposed to work with encoding ...? >>>> >>>> it does not work even with qsv set to p010 AND patch ? >>>> >>>> if so, I am afraid I only can put this item on shelf ... for now. Look >>>> at mantis bug database, if there is no entry about 10bit vaapi >>>> deciding/encoding - add it please .... >>>> >>>> you can also test (at some point in time ) this gpu_screen_recorder, it >>>> builds but does not work for me due to "nouveau" driver. >>>> >>>> >>> >>> at least with another patch (attached) I can get this: >>> >>> bash-5.1$ bin/cin ~/6029.mp4 >>> Cinelerra Infinity - built: Oct 17 2024 16:18:31 >>> git://git.cinelerra-gg.org/goodguy/cinelerra.git >>> (c) 2006-2019 Heroine Virtual Ltd. by Adam Williams >>> 2007-2020 mods for Cinelerra-GG by W.P.Morrow aka goodguy >>> 2003-2017 mods for Cinelerra-CV by CinelerraCV team >>> 2015-2024 mods for Cinelerra-GG by Cinelerra-GG team >>> >>> Libav version: Lavc61.3.100 >>> >>> Cinelerra is free software, covered by the GNU General Public License, >>> and you are welcome to change it and/or distribute copies of it under >>> certain conditions. There is absolutely no warranty for Cinelerra. >>> >>> RenderFarmClient::main_loop: client started >>> [AVHWDeviceContext @ 0xf925c00] Trying to use DRM render node for device >>> 0. >>> [AVHWDeviceContext @ 0xf925c00] libva: VA-API version 1.19.0 >>> [AVHWDeviceContext @ 0xf925c00] libva: Trying to open >>> /usr/lib/dri/nouveau_drv_video.so >>> [AVHWDeviceContext @ 0xf925c00] libva: Found init function >>> __vaDriverInit_1_19 >>> [AVHWDeviceContext @ 0xf925c00] libva: va_openDriver() returns 0 >>> [AVHWDeviceContext @ 0xf925c00] Initialised VAAPI connection: version >>> 1.19 >>> [AVHWDeviceContext @ 0xf925c00] Format 0x3231564e -> nv12. >>> [AVHWDeviceContext @ 0xf925c00] Format 0x30313050 -> p010le. >>> [AVHWDeviceContext @ 0xf925c00] Format 0x36313050 -> unknown. >>> [AVHWDeviceContext @ 0xf925c00] Format 0x30323449 -> yuv420p. >>> [AVHWDeviceContext @ 0xf925c00] Format 0x32315659 -> yuv420p. >>> [AVHWDeviceContext @ 0xf925c00] Format 0x56595559 -> unknown. >>> [AVHWDeviceContext @ 0xf925c00] Format 0x32595559 -> yuyv422. >>> [AVHWDeviceContext @ 0xf925c00] Format 0x59565955 -> uyvy422. >>> [AVHWDeviceContext @ 0xf925c00] Format 0x41524742 -> bgra. >>> [AVHWDeviceContext @ 0xf925c00] Format 0x41424752 -> rgba. >>> [AVHWDeviceContext @ 0xf925c00] Format 0x58524742 -> bgr0. >>> [AVHWDeviceContext @ 0xf925c00] Format 0x58424752 -> rgb0. >>> [AVHWDeviceContext @ 0xf925c00] VAAPI driver: Mesa Gallium driver 22.1.7 >>> for NV106. >>> [AVHWDeviceContext @ 0xf925c00] Driver not found in known nonstandard >>> list, using standard behaviour. >>> [AVHWFramesContext @ 0xea43980] Created surface 0x1. >>> [AVHWFramesContext @ 0xea43980] Direct mapping possible. >>> [av1_vaapi @ 0xf978680] Input surface format is p010le. >>> [av1_vaapi @ 0xf978680] Compatible profile VAProfileAV1Profile0 (32) is >>> not supported by driver. >>> [av1_vaapi @ 0xf978680] No usable encoding profile found. >>> FFMPEG::open_encoder err: Function not implemented >>> int FFMPEG::open_encoder(const char*, const char*): >>> open failed av1_vaapi:/dev/shm/yuv-test-reenc-rgba8-mpeg-range.webm >>> Render::render_single: Session finished. >>> Total excess of backups: -50 >>> [AVIOContext @ 0xeaf1aa40] Statistics: 4570842 bytes read, 5 seeks >>> [AVIOContext @ 0xeaf348c0] Statistics: 2997978 bytes read, 2 seeks >>> [AVIOContext @ 0xd7aa8900] Statistics: 4272574 bytes read, 2 seeks >>> [AVIOContext @ 0xd7954080] Statistics: 2997978 bytes read, 2 seeks >>> [AVIOContext @ 0xf40c2840] Statistics: 9351290 bytes read, 18 seeks >>> [AVIOContext @ 0xf4008a00] Statistics: 2997978 bytes read, 2 seeks >>> Session time: 0:00:48 >>> Cpu time: user: 0:00:09.659 sys: 0:00:03.077 >>> >>> so i guess it sets surface format now correctly, just no encoder >>> entrypoint (obviously on my hw)? >>> >>> Terje, Andrea - can you test this hack ? >>> >>> >> one more time, this time with env variable >> >> CIN_10BIT_ENC=1 bin/cin ~/6029.mp4 >> >> should enable P010LE input surface format ...but you probably need to set >> profile etc manually? >> >> >> >> OK, P010 should be a 10bit 420 format, while Y210 is the 10bit 422 format. >> >> >> I tried your last suggestion and started Cin with >> >> CIN_10BIT_ENC=1 bin/cin >> >> rendered a 10bit 422 mov input file and got >> >> ffprobe -hide_banner hd01_hevc_vaapi.mp4 >> Stream #0:0[0x1](und): Video: hevc (Main) (hev1 / 0x31766568), >> yuv420p(tv, bt709/unknown/unknown, top coded first (swapped)), 1920x1080 >> [SAR 1:1 DAR 16:9], 11225 kb/s, 25 fps, 25 tbr, 12800 tbn (default) >> >> from Mediainfo >> Color space : YUV >> Chroma subsampling : 4:2:0 >> Bit depth : 8 bits >> >> >> But how should I apply your attached "10bit.diff" patch? >> >> It didn't work with >> >> localhost:/Cin # git am 10bit.diff >> fatal: previous rebase directory .git/rebase-apply still exists but mbox >> given. >> > > > try to > > rm .git/rebase-apply > > > localhost:/Cin # rm .git/rebase-apply > rm: cannot remove '.git/rebase-apply': No such file or directory > > localhost:/Cin # git am 10bit.diff > fatal: previous rebase directory .git/rebase-apply still exists but mbox > given. > > Am I in wrong directory? > oh sorry yes rm ../.git/rebase-apply (from one level up) > > localhost:/Cin # ls -la /Cin > lrwxrwxrwx 1 root root 29 Oct 22 20:23 /Cin -> > /home/cinelerra/cinelerra-5.1 > > localhost:/Cin # ls 10bit.diff > 10bit.diff > > > >> >> >> >> >> >
-- Cin mailing list [email protected] https://lists.cinelerra-gg.org/mailman/listinfo/cin
