сб, 9 нояб. 2024 г., 19:10 Terje J. Hanssen <[email protected]>:
> > > > Den 09.11.2024 10:48, skrev Terje J. Hanssen: > > > > > Den 09.11.2024 00:10, skrev Andrew Randrianasulu: > > > > сб, 9 нояб. 2024 г., 01:58 Terje J. Hanssen <[email protected]>: > >> >> >> >> Den 07.11.2024 22:53, skrev Terje J. Hanssen: >> >> >> >> >> Den 07.11.2024 20:41, skrev Andrew Randrianasulu: >> >> >>>> >>> >>> sorry I mean set like this >>> export CIN_10BIT_ENC=1 >>> >>> >>> >>> Now hevc_vaapi was able to render to yuv420p10le, that is 10-bit 420p, >>> by selecting pixels p010le. >>> Also rendering with pixels y210 resulted in yuv420p10le, that is not >>> 10-bit 422p as for hevc_qsv below. >>> >>> I would assume this is caused due to the incomplete hevc_vapi.mp4 preset >>> as shown below? >>> >> >> More like incomplete code that does not yet know how to get custom format >> ... so far as name says it only adds 10bit 4:2:0 encoding, not 4:2:2 >> subsampling. >> >> >> can you test other vaapi/qsv profiles too? >> >> >> also with test picture actually containing more than 8bit values? ;) >> >> >> To the latter; the input file cfhd01.mkv was 10bit 422: yuv422p10le >> >> Maybe have a look at and compare with the hevc_qsv code that managed >> 10bit 422: yuv422p10le? >> >> >> >> Summary >> ---------------- >> >> hevc_vaapi.mp4 and av1_vaapi.mp4 >> Pixels: vaapi (default and only option) works and results in yuv420p >> p010 or p010le written works and result in yuv420p10le >> y210 or all variants y210le/Y210/le render (with >> fallback) to yuv420p10le >> >> h264_vaapi.mp4 didn't render (error message) >> > > yeah, no 10bit h264 here (while possible by spec) > > > >> av1_qsv.mp4 is for external ffmpeg >> > > if you still have my onevpl patch applied (and enabled it earlier with > configure switch) too - qsv should work ... > > try it too just in case? > > > av1_qsv.mp4 > Would not render at all > > [av1_qsv @ 0x7fe19826f240] Current picture structure is unsupported > [av1_qsv @ 0x7fe19826f240] some encoding parameters are not supported by > the QSV runtime. Please double check the input parameters. > FFMPEG::open_encoder err: Function not implemented > int FFMPEG::open_encoder(const char*, const char*): > open failed av1_qsv:/Videoklipp/Cineform/cfhd01_av1_qsv_pix_nv12.mp4 > Render::render_single: Session finished. > > > hevc_qsv.mp4 > Does render, but only to yuv420p now. > For one or another reason pixel formats p010le and y210le results in > yuv420p. > That is I am not able to reconstruct the previous 10bit results below. > I do another attempt next day. > > > > hevc_qsv.mp4 revised: > pixel formats p010le and y210le render again to yuv420p10le and > .yuv422p10le respectively > Woops; only when these window lines are commented out as written in my > previous post ! > > # profile=main > # cin_pix_fmt=nv12 > > Works both with and without > export CIN_10BIT_ENC=1 > before cin/bin > we most likely will need new profiles for 10bit everything anyway ... thanks for continued (and very exhaustive!) testing > > > > > > > >> >> >> (probably made up something in GIMP 2.10, save as tiff/EXR, import in >> cingg, set format to rgba-float, rendrer ..... hm, may be use YUView to see >> pixel values independently of cinelerra's decoding abilities? a bit of >> adventure, but should provide some proof about encoding) >> >> >>> ffprobe -hide_banner cfhd01_hevc_vaapi_pix_p010le.mp4 >>> Input #0, mov,mp4,m4a,3gp,3g2,mj2, from >>> 'cfhd01_hevc_vaapi_pix_p010le.mp4': >>> Metadata: >>> major_brand : isom >>> minor_version : 512 >>> compatible_brands: isomiso2mp41 >>> encoder : Lavf61.1.100 >>> Duration: 00:01:11.20, start: 0.000000, bitrate: 11082 kb/s >>> Stream #0:0[0x1](und): Video: hevc (Main 10) (hev1 / 0x31766568), >>> yuv420p10le(tv, bt709/unknown/unknown, top coded first (swapped)), >>> 1920x1080 [SAR 1:1 DAR 16:9], 11080 kb/s, 25 fps, 25 tbr, 12800 tbn >>> (default) >>> Metadata: >>> handler_name : VideoHandler >>> vendor_id : [0][0][0][0] >>> >>> ffprobe -hide_banner cfhd01_hevc_vaapi_pix_y210.mp4 >>> Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'cfhd01_hevc_vaapi_pix_y210.mp4': >>> Metadata: >>> major_brand : isom >>> minor_version : 512 >>> compatible_brands: isomiso2mp41 >>> encoder : Lavf61.1.100 >>> Duration: 00:01:11.20, start: 0.000000, bitrate: 11082 kb/s >>> Stream #0:0[0x1](und): Video: hevc (Main 10) (hev1 / 0x31766568), >>> yuv420p10le(tv, bt709/unknown/unknown, top coded first (swapped)), >>> 1920x1080 [SAR 1:1 DAR 16:9], 11080 kb/s, 25 fps, 25 tbr, 12800 tbn >>> (default) >>> Metadata: >>> handler_name : VideoHandler >>> vendor_id : [0][0][0][0] >>> >>> >>>> ----- >>>> >>>> No hevc_vaapi 10bit worked: >>>> >>>> localhost:/Cin/ffmpeg/video # cat hevc_vaapi.mp4 >>>> mp4 hevc_vaapi >>>> # cin_hw_dev=vaapi >>>> >>>> I tested hevc_vaapi.m4 and tried to write p010 both in the pixels field >>>> and as format=p010 in the widget, >>>> but only 8bit 420p each time. >>>> >>>> ------------------------------- >>>> >>>> hevc_qsv 10 bit worked with p010 and with y210 >>>> >>>> localhost:/Cin/ffmpeg/video # cat hevc_qsv.mp4 >>>> # only usable with ext. ffmpeg, another pixfmt is yuyv422 >>>> mp4 hevc_qsv >>>> # profile=main >>>> # cin_pix_fmt=nv12 >>>> >>>> >>>> ffprobe -hide_banner cfhd01_hevc_qsv_pix_p010le.mp4 >>>> Input #0, mov,mp4,m4a,3gp,3g2,mj2, from >>>> 'cfhd01_hevc_qsv_pix_p010le.mp4': >>>> Metadata: >>>> major_brand : isom >>>> minor_version : 512 >>>> compatible_brands: isomiso2mp41 >>>> encoder : Lavf61.1.100 >>>> Duration: 00:01:11.20, start: 0.000000, bitrate: 28276 kb/s >>>> Stream #0:0[0x1](und): Video: hevc (Main 10) (hev1 / 0x31766568), >>>> yuv420p10le(tv, bt709/unknown/unknown, top coded first (swapped)), >>>> 1920x1080 [SAR 1:1 DAR 16:9], 28273 kb/s, 25 fps, 25 tbr, 12800 tbn >>>> (default) >>>> Metadata: >>>> handler_name : VideoHandler >>>> vendor_id : [0][0][0][0] >>>> >>>> >>>> ffprobe -hide_banner cfhd01_hevc_qsv_pix_y210le.mp4 >>>> Input #0, mov,mp4,m4a,3gp,3g2,mj2, from >>>> 'cfhd01_hevc_qsv_pix_y210le.mp4': >>>> Metadata: >>>> major_brand : isom >>>> minor_version : 512 >>>> compatible_brands: isomiso2mp41 >>>> encoder : Lavf61.1.100 >>>> Duration: 00:01:11.20, start: 0.000000, bitrate: 32074 kb/s >>>> Stream #0:0[0x1](und): Video: hevc (Rext) (hev1 / 0x31766568), >>>> yuv422p10le(tv, bt709/unknown/unknown, top coded first (swapped)), >>>> 1920x1080 [SAR 1:1 DAR 16:9], 32071 kb/s, 25 fps, 25 tbr, 12800 tbn >>>> (default) >>>> Metadata: >>>> handler_name : VideoHandler >>>> vendor_id : [0][0][0][0] >>>> >>>> >>>>> >>>>> you also can set bin/ffmpeg/encode.opts loglevel to debug, but render >>>>> exactly one frame so log will be smaller. >>>>> >>>>> >>>>> How to render render exactly one frame ? >>>>> >>>> >>>> In render dialog window there is selection of render range with 4 >>>> choices ... 1 frame mp4/webm should be perfectly legal :) >>>> >>>>> >>>>> >>>>> >>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> >>>>>>> "git log" where? >>>>>>> >>>>>> >>>>>> >>>>>> in cinelerra-5.1 directory, or some down the hierarchy ... >>>>>> >>>>>> this is command, part of git suite of commands. >>>>>> >>>>>> displays log of commits in git repo. (for me it uses l"less" as >>>>>> pager, so you can scroll around and search) >>>>>> >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >> > >
-- Cin mailing list [email protected] https://lists.cinelerra-gg.org/mailman/listinfo/cin
