hi,
same thing here. how and where could i apply the fix - in gentoo?
am not a coder but know how to use an editor;-).
cheers
jan
Scott C. Frase wrote:
Hey guys,
Here are my results. One note: I encountered the 1080i playback bug
that Marcin Kostur reported a few weeks back, wherein 1080i output plays
back normally (~30fps) from the start of the video, but slows down
considerably to 2fps if you choose a random point within the video.
This bug documented here:
http://bugs.cinelerra.org/show_bug.cgi?id=348
However, this bug has not been resolved, other than in the fix that
Marcin found:
https://init.linpro.no/pipermail/skolelinux.no/cinelerra/2006-November/008696.html
Could any of the programmers update Bug 348 to let us know if this fix
is sufficient?
thanks,
scott
PS - here are my results of the playback:
System:
Cinelerra CVS, SVN r947
Dell 400SC, 3.2Ghz, 800FSB, 2GB 400Mhz, Dual DDR, ECC
250GB SATA system drive
Nvidia GEForce 7600GS 8xAGP video card, 512MB memory
Project Format: 1080i preset
Driver: X11-OpenGL or X11-XV
Playback every frame/Decode frames async: unselected
Compositor: 75% spanned across two monitors
Playback FPS (from beginning of video): OpenGL: 30.15, XV: 29.4
Playback FPS (from 3 seconds into the video): OpenGL 2.21, XV: says
29.94, but that is not correct, as playback is slowed considerably
When I playback the video, I get a bunch of these messages in the
terminal window in which I started cinelerra:
mpeg3_read_prev_packet 100 result=0 title=0 tell=5866ff8
program_byte=5866ff8
mpeg3_read_prev_packet 1 result=0 title=0 tell=5866ff8
program_byte=5866ff8
/sbin/hdparm -t -T /dev/sda
/dev/sda:
Timing cached reads: 2528 MB in 2.00 seconds = 1263.76 MB/sec
Timing buffered disk reads: 116 MB in 3.01 seconds = 38.58 MB/sec
iostat output (average):
avg-cpu: %user %nice %sys %iowait %idle
73.83 0.00 3.10 0.00 23.08
cat /proc/meminfo:
MemTotal: 2070884 kB
MemFree: 812096 kB
Buffers: 62404 kB
Cached: 407492 kB
SwapCached: 0 kB
Active: 973628 kB
Inactive: 199840 kB
HighTotal: 1179088 kB
HighFree: 66404 kB
LowTotal: 891796 kB
LowFree: 745692 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 8 kB
Writeback: 0 kB
AnonPages: 703688 kB
Mapped: 79100 kB
Slab: 58140 kB
PageTables: 7232 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 1035440 kB
Committed_AS: 2329572 kB
VmallocTotal: 116728 kB
VmallocUsed: 43068 kB
VmallocChunk: 67060 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
Hugepagesize: 2048 kB
I got 29.94 fps. Compositor at 75 between 24->28 fps when compositor was at a scale of 50 % on a Intel(R)
Pentium(R) D CPU 2.66GHz
When at 100% I get 19 fps with the picture going over both screens (dual
monitor) and 24-25 fps when compositor on 1 screen, (but whole picture
not visible)
Video Driver: X11-XV
Play every frame is selected
Decode frames asyncronously unselected (REALLY slow when selected!)
Video Card: nVidia Corporation GeForce 6200
Dual monitor, both @ 1280x1024
nvidia module version = 1.0.9629
/sbin/hdparm -t -T /dev/hda
/dev/hda:
Timing cached reads: 1884 MB in 2.00 seconds = 941.43 MB/sec
Timing buffered disk reads: 214 MB in 3.02 seconds = 70.90 MB/sec
Using Fedora Core 6, and livna repository to satisfy required libraries.
Compiling cinelerra with the following script:
#!/usr/bin/bash
echo configureing for pentium4
# --with-external-ffmpeg
../hvirtual/configure --prefix=/usr --enable-x86 --enable-mmx
--enable-freetype2 \
--with-buildinfo=svn \
CFLAGS='-O3 -pipe -fomit-frame-pointer -funroll-all-loops
-falign-loops=2 -falign-jumps=2 -falign-functions=2 -ffast-math
-march=nocona -mfpmath=sse,387 -mmmx -msse' \
CPPFLAGS='-O3 -pipe -fomit-frame-pointer -funroll-all-loops
-falign-loops=2 -falign-jumps=2 -falign-functions=2 -ffast-math
-march=nocona -mfpmath=sse,387 -mmmx -msse' \
CXXFLAGS='-O3 -pipe -fomit-frame-pointer -funroll-all-loops
-falign-loops=2 -falign-jumps=2 -falign-functions=2 -ffast-math
-march=nocona -mfpmath=sse,387 -mmmx -msse'
Though /proc/cpuinfo shows me that I don't have sse3 (which nocona
requires!) so I am not too sure of the stability..
PIerre
Jan Luo wrote:
o.k. is there any way to understand what the bottlenecks on the
hardware side
are. like cpu, hd-speed or ram and so on?
cheers
jan
Nicolas Maufrais wrote:
On Sat, Nov 18, 2006 at 02:24:29AM +0100, Jan Luo wrote:
found the following link in the hdforindies blog with ( in my
understanding ) hd clips:
http://www.siliconimaging.com/DigitalCinema/gallery_footage.html
when i play the scene_1_shot10 clip / MPEG-2 19Mb/s 1080/24P (89MB)
i get frame rates around 17 fps. my box is a dual amd64 4800. can
anyone play these
at 30 fps? on which hardware?
thanks
jan
I got 13fps on my AMD64 X2 4600.
Nicolas.
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
