I run cinelerra and load ceremony.dv then attempt to export to
ceremony.m2v using file format YUV4MPEG Stream, only video. The video
settings are set to use pipe and mpeg2enc -f 8 -o % Interlacing bottom
fields first. It used to show the pipe command in red in the render
dialog under the file but in this version it does not show it any more.
Is it supposed to not show the pipe command in the render dialog?
My distro is FC6 kernel 2.6.19-1.2911.fc6. I installed the rpm from
freshrpms cinelerra-2.1-0.12.20070108.fc6. I am supposed to get this
wedding finished up so any help is appreciated.
Cinelerra 2.1CV (C) 2006 Heroine Virtual Ltd.
Compiled on Tue Jan 9 11:09:29 EST 2007
Cinelerra is free software, covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it under
certain conditions. There is absolutely no warranty for Cinelerra.
Render::run 1
Render::run 2
Render::run 3
Render::run 4
Render::run 5
Render::run 6
Render::run 7
Render::run 8
Render::run 8.1
Render::run 8.2
Render::run 8.3
Render::run 9
Render::run 10
trying popen( mpeg2enc -f 8 -o
/mnt/video/myprojects/levin_christa/render/mp/ceremony.m2v)
INFO: [mpeg2enc] SETTING EXTENDED MMX for MOTION!
INFO: [mpeg2enc] SETTING SSE and MMX for TRANSFORM!
INFO: [mpeg2enc] SETTING EXTENDED MMX for PREDICTION!
INFO: [mpeg2enc] Selecting DVD with dummy navigation packets output profile
INFO: [mpeg2enc] Assuming norm NTSC
INFO: [mpeg2enc] Interlaced input - selecting interlaced encoding.
INFO: [mpeg2enc] Encoding MPEG-2 video to
/mnt/video/myprojects/levin_christa/render/mp/ceremony.m2v
INFO: [mpeg2enc] Horizontal size: 720 pel
INFO: [mpeg2enc] Vertical size: 480 pel
INFO: [mpeg2enc] Aspect ratio code: 2 = 4:3 display
INFO: [mpeg2enc] Frame rate code: 4 = 30000.0/1001.0 (NTSC VIDEO)
INFO: [mpeg2enc] Bitrate: 7500 KBit/s
INFO: [mpeg2enc] Quality factor: 8 (Quantisation = 9) (1=best, 31=worst)
INFO: [mpeg2enc] Field order for input: bottom-field-first
INFO: [mpeg2enc] Sequence unlimited length
INFO: [mpeg2enc] Search radius: 16
INFO: [mpeg2enc] DualPrime: no
INFO: [mpeg2enc] Using one-pass rate controller
INFO: [mpeg2enc] GOP SIZE RANGE 7 TO 15
INFO: [mpeg2enc] Setting colour/gamma parameters to "NTSC"
INFO: [mpeg2enc] Progressive format frames = 0
INFO: [mpeg2enc] Using default unmodified quantization matrices
INFO: [mpeg2enc] SETTING MMX and MMX for QUANTIZER!
INFO: [mpeg2enc] PAR = 0
INFO: [mpeg2enc] NEW GOP INIT length 15
signal_entry: got SIGSEGV my pid=14755 execution table size=0:
signal_entry: lock table size=14
0x1c9e170 CWindowTool::input_lock CWindowTool::run
0xca2f90 BC_Synchronous::next_command BC_Synchronous::run
0x1d7a1c0 TransportQue::output_lock PlaybackEngine::run
0x1d7abb0 MainIndexes::input_lock MainIndexes::run 1
0x1df4e60 ResourceThread::draw_lock ResourceThread::run
0x2aaac0156fa0 BC_Repeater::pause_lock BC_Repeater::run
0x1e2f610 BC_Repeater::pause_lock BC_Repeater::run
0x1cc3700 TransportQue::output_lock PlaybackEngine::run
0x1e30f80 BC_WindowBase::event_condition BC_WindowBase::get_event
0x1abd500 BC_WindowBase::event_condition BC_WindowBase::get_event
0x1cec390 BC_WindowBase::event_condition BC_WindowBase::get_event
0x1bf41a0 BC_WindowBase::event_condition BC_WindowBase::get_event
0x1cc5160 BC_WindowBase::event_condition BC_WindowBase::get_event
0x1d7cd70 BC_WindowBase::event_condition BC_WindowBase::get_event
BC_Signals::dump_buffers: buffer table size=0
BC_Signals::delete_temps: deleting 0 temp files
SigHandler::signal_handler total files=1
Closing /mnt/video/myprojects/levin_christa/render/mp/ceremony.m2v
INFO: [mpeg2enc] Signaling last frame = -1
INFO: [mpeg2enc] Guesstimated final muxed size = 0
Aborted
_______________________________________________
Cinelerra mailing list
[email protected]
https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
