scott, have you tried "separate x screen" instead of "twinview"? otherwise, i don't think i understand enough to be of any serious help. good luck, georg
On Tuesday 28 October 2008 01:29:26 Scott C. Frase wrote: > Guys, > I am trying to use Cinelerra's screencapture recording function to > capture what is being displayed in the right display of my dual head > configuration. In the Prefs -> Recording -> Display box, Cinelerra > allows you to enter the display as it is found in xorg.conf. Depending > on the identifier of the screen in xorg.conf, this is usually comes in > the form: > <computername>:0.0 > eg, > server:0.0 > > My problem is that I have an NVidia card running TwinView on dual > 1280x1024 Dell flat panels. The only identifier for the TwinView > display is 0.0, so the recording always starts on my left monitor. > However, I need to capture what is in the right monitor. The stuff I > need to capture is output from a custom visualization software that does > not allow me to change output displays. > > My thought was maybe I can just feed in a "+1280" so that the screen > capturing starts 1280 pixels to the right. So, I looked at > recordmonitor.C and see a number of functions for the > RecordMonitorCanvas and values for position of x. However, my chops in > C suck, so I can't figure out what to change in order to move the start > of the recording 1280 pixels to the right. Even if I have to hard code > the value into recordmonitor.C and recompile, that is fine with me. > > can anyone help? > > thanks, > scott > > > > > _______________________________________________ > Cinelerra mailing list > [email protected] > https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra -- dr. kurt georg hooss kurts film / schoepfung & wandel breite strasse 6-8, d-23552 luebeck kurts-film.de _______________________________________________ Cinelerra mailing list [email protected] https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
