_______________________________________________ Cinelerra mailing list [email protected] https://init.linpro.no/mailman/skolelinux.no/listinfo/cinelerra
My old HP Box with 2.2ghrtz Asus dual core 64 bit mother board over
heated and died. It was limited to I g ram and it ran hot at 225f. I
was doing black and white video over an hour long and the machine was
well over 200F when half way through. I put this temperature info in
here as it may be of some use to others.
I have a 2004 IBM Think Centre desktop. 3 ghtz quad core, with i386
processors. I plan to dedicate it as a video editing machine. It only
has 512 MB of ram but I will upgrade to probably 2g or maybe 4 if I can
get off the money. I have a 250G hard drive I can replace the old 120 G
drive with it. This would seem a nice video editing box.
I loaded a video on Cinelerra to see if could be run at all. It
runs slowly and very jumpy. Would that likely be due to not having
enough ram or is something else going on here? I am using AVlinux which
I am liking a lot. I would appreciate any advice if anyone has any
experience with these IBM machines that would indicate the machine might
not be suitable. I also have a Dell dual core 64 bit 2.8 Ghtz machine
that I could use as a dedicated machine instead. The only thing I see
that could be a problem is the drive is small and the parts are all
proprietary and the drives I have won't install to the Dell harnesses.
I have been using ubuntu but am not crazy about the direction it is
going and do like Avlinux desktop and configuration. I would appreciate
any comments that any think might be helpful.
Thanks, Doug
Pollard
- [CinCV] video editing machine is dead Douglas Pollard
- Re: [CinCV] video editing machine is dead David Armstrong
