Regular PA-T3+ cards will not work, you want to be looking at PA-MC-2T3+ cards (multichannel, lets you set up serial interfaces for individual T1s in the DS3). PA-T3+ cards will only let you terminate a single full or subrate DS3. ~Matt
________________________________ From: [EMAIL PROTECTED] on behalf of Paul Stewart Sent: Wed 3/28/2007 10:42 To: [email protected] Subject: [c-nsp] 7513 T3 Card Question Hi folks... We're looking at an application whereby providing T1 services out to customers... since we have a spare 7513 chassis kicking around it makes sense to use it.... One concept is to put a pair of PA-T3+ cards into the chassis and connect the T3's into a Telco Systems DS3 MUX - we're looking at 40-50 full rate T1 customers some of which will be load balanced as well..... First question, will this work? Second question, the 7513 only has VIP2-50 cards in it and I read some Cisco docs that state minimum RSP7000 series processors and ours have RSP5000 series.... Looking for real-world feedback... other option is to just use 8 port T1 cards (PA-MC-8T1) which seems like a safer bet at this point.... Thanks in advance, Paul _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
