Paul Stewart wrote: > One concept is to put a pair of PA-T3+ cards into the chassis and connect > the T3's into a Telco Systems DS3 MUX - we're looking at 40-50 full rate T1 > customers some of which will be load balanced as well..... > > First question, will this work? Second question, the 7513 only has VIP2-50 > cards in it and I read some Cisco docs that state minimum RSP7000 series > processors and ours have RSP5000 series....
Nope. You'd need PA-MC-T3 or PA-MC-2T3 cards. You're also confusing legacy 7000-series _products_ (RSP7000) with underlying silicon (VIP2-50 uses the RISC-5000 CPU I believe). VIP2-50 will work, but I'd recommend an upgrade to VIP4-50 if possible. ECC memory will save you countless headaches. Additional packet buffer is also a good thing IMO. > Looking for real-world feedback... other option is to just use 8 port T1 > cards (PA-MC-8T1) which seems like a safer bet at this point.... Another option, but again I'd recommend VIP4-50. pt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
