Is there a intregrated CSU/DSU T1 interface for the 7200 series? I hate having to have DSU's all over the place.
Joseph > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Paul Stewart > Sent: Wednesday, March 28, 2007 8:16 AM > To: 'Matt Addison'; [email protected] > Subject: Re: [c-nsp] 7513 T3 Card Question > > Thanks Matt & Pete for the answers.... > > Another question would then become what device(s) are > recommended for T1 > aggregation? I'm looking through Cisco's website and was > hoping even on a > smaller router we could for 4 or 8 T1's and just use smaller > routers in > general ... we *really* want intregrated CSU/DSU .... > > Price is an issue of course too... just wondering what others > are using > besides 7513's for this application? ;) > > Paul > > > -----Original Message----- > From: Matt Addison [mailto:[EMAIL PROTECTED] > Sent: Wednesday, March 28, 2007 11:00 AM > To: Paul Stewart; [email protected] > Subject: RE: [c-nsp] 7513 T3 Card Question > > Regular PA-T3+ cards will not work, you want to be looking at > PA-MC-2T3+ > cards (multichannel, lets you set up serial interfaces for > individual T1s in > the DS3). PA-T3+ cards will only let you terminate a single > full or subrate > DS3. > > ~Matt > > ________________________________ > > From: [EMAIL PROTECTED] on behalf of Paul Stewart > Sent: Wed 3/28/2007 10:42 > To: [email protected] > Subject: [c-nsp] 7513 T3 Card Question > > > > Hi folks... > > We're looking at an application whereby providing T1 services out to > customers... since we have a spare 7513 chassis kicking > around it makes > sense to use it.... > > One concept is to put a pair of PA-T3+ cards into the chassis > and connect > the T3's into a Telco Systems DS3 MUX - we're looking at > 40-50 full rate T1 > customers some of which will be load balanced as well..... > > First question, will this work? Second question, the 7513 > only has VIP2-50 > cards in it and I read some Cisco docs that state minimum > RSP7000 series > processors and ours have RSP5000 series.... > > Looking for real-world feedback... other option is to just > use 8 port T1 > cards (PA-MC-8T1) which seems like a safer bet at this point.... > > Thanks in advance, > > Paul > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
