No reason to go with the non-A model.. especially since its actually more expense in the market currently.
Peter Kranz Founder/CEO - Unwired Ltd www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207-0000 [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Holemans Wim Sent: Thursday, March 29, 2007 5:09 AM To: [email protected] Subject: [c-nsp] WS-X6148-GE-TX I have to 'replicate' an existing 6513 switch. The current 6513 has a sup2 Supervisor board and 5 WS-X6148-GE-TX boards. The Sup2 board is EOS so we will go for the Sup32 engine. I noticed in our pricelist that there is also a WS-X6148A-GE-TX board. I did a search at cisco's website and it seems to me that this board has more features (e.g. larger buffer/port, jumbo support) than the original WS-X6148-GE-TX board but both are still available according to our pricelist. (The A-version however is cheaper). Does anyone know a reason why we should go for the 6148 board instead of 6148A ? Thanks, Wim Holemans Network Services University of Antwerp _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
