Yes... I use it on DMVPN tunnels to prevent fragmentation from breaking some apps...
D On 3/29/07, Kurt Bales <[EMAIL PROTECTED]> wrote: > > Hey Guys, > > We have an arrangement where we have a hub-and-spoke tunnel arrangement in > our network, where a central router is terminating tunnels from remote > locations that are not directly terminated on the WAN. On the tunnel > interfaces we currently have the mtu set to 1400. Should we also be using > mss-adjust to enable the router to compensate for the lower MTU? > > Everything I have read on MSS-Adjust indicates its for use with PPPoE, but > will it work for other situations where you need to lower the MTU between > interfaces? > > > Regards, > > Kurt > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
