Thats 520mbps of 64 byte packets on the NPE-G1. "Normal" workloads (like say IMIX) could easily see 4 - 5 times that.
-jim On 4/2/07, Justin Shore <[EMAIL PROTECTED]> wrote: > > Gary Stanley wrote: > > At 04:29 AM 4/2/2007, Shaun wrote: > >> The 2800's look to support a bunch of modules, ds1,ds3,gb,etc... I was > >> wondering how well a 2811 or higher unit would work to use as a border > >> router uplinked to a upstream at Gbit. If the 2800's cant handle it, > >> how about the 3800's? Right now i'm using 3750's for this using > roughly > >> ~100mbit in/out and only receiving default routes from upstream. > >> > >> ~Shaun > > > > A 2811 will blow up with that much traffic for routing. I don't think > > any of the 28xx series can handle that much traffic, I had a 2851 and > > it was at 90% CPU with 75mbit of traffic > > > > Please read; > > > > > http://www.cisco.com/warp/public/765/tools/quickreference/routerperformance.pdf > > Agreed. Pick up a 7206VXR w/ a NPE-G2 or a short stack 7600 if you want > to support that kind of bandwidth. Even the 3845 maxes out at around > 256MB. A NPE-G1 is 520 I believe. That NPE-G2 is a full Gig. > > Justin > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
