Hello David: > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > [EMAIL PROTECTED] On Behalf Of David Kim > Sent: Wednesday, April 11, 2007 1:30 PM > To: cisco-nsp@puck.nether.net > Subject: [c-nsp] TDM solution on ONS15454 > > Dear All, > We have cisco two ONS15454-E(SDH) and we'd like to use them for > add/drop > TDM( T1,E1,DS3) between 4F and 28F. > In this box , we just have control b'd and 10G cross-connect and 2 > STM64 and > 4port STM-4 and 12port Ethernet. > Coould you give me any suggestion how can we provision TDM with these > box. >
You need the appropriate cards (t-1, DS-3, etc.) and a backplane that has telco-style connectors. I know Cisco has chassis backplanes with BNC and other types of connectors. With the appropriate card you just build the circuit from the ingress port to the egress port across the network. Regards, Mike _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/