Hello: > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > [EMAIL PROTECTED] On Behalf Of J Springer > Sent: Thursday, April 12, 2007 11:59 AM > To: [EMAIL PROTECTED] > Subject: Re: [c-nsp] 802.1q - Max Number of Subinterfaces > > Michael K. Smith - Adhost wrote: > > > Something to be aware of is the per-interface sub-interface limits > for > > the various cards. Perhaps someone has a pointer to an official > Cisco > > document, but I *think* almost all of the FE/GE interfaces on the > > 7200-series support up to 256 sub-interfaces. Thus, you'd have to > have > > multiple interfaces to hit the chassis limit. > > This matters. > > I would like to terminate the vlans on a single g/f interface. It > doesn't > matter if it's a router or L2/L3 switch. > > Does the same limitation apply using SVI on a switch? > At that point I think it is chassis dependent. I think you're going to be looking at the 6/7k chassis for those kind of numbers.
Regards, Mike _______________________________________________ cisco-nsp mailing list [EMAIL PROTECTED] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
