The linecards do not carry full BGP tables, just the CEF table. Check the output of "execute-on slot <X> show memory free", you probably have a good amount of free memory on the LCs (I have ~ 80MB free on my LCs). ~Matt
________________________________ From: [EMAIL PROTECTED] on behalf of Sven Juergensen Sent: Tue 4/17/2007 04:08 To: [email protected] Subject: [c-nsp] >256MByte Processor Memory for Linecards running a fullBGP-table? Dear list, we have several FRU: Linecard/Module: 3GE-GBIC-SC= Processor Memory: MEM-GRP/LC-256= Packet Memory: MEM-PKT-512-UPG= L3 Engine: 2 - Backbone OC48 (2.5 Gbps) MBUS Agent Software version 2.48 (RAM) (ROM version is 3.47) ROM Monitor version 17.1 Fabric Downloader version used 10.1 (ROM version is 10.1) running in 12008 GSRs. From what i gathered, sooner or later the processor memory won't be sufficient to run a full BGP-table and i'm wondering if it is possible (aside from trashing existing GSRs and forklift upgrading, accepting only a default route from the upstream providers or setting up dedicated BGP routers elsewhere) to increase that amount? Did anyone ever try stuffing in more memory or does it require a firmware upgrade of some sort? Thank you in advance, Sven _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
