The switch is depending on the bonding type you want. If you are looking for active/passive, you may use any switch. If you want to aggregate bandwidth, incoming and outgoing, the switch may have some requisited and some extra config.
You may want to take a look to http://coffeenix.net/data_repository/txt/bonding.txt Regards On 4/18/07, Paolo Riviello www.paoloriviello.com <[EMAIL PROTECTED]> wrote: > > Hi, > are you ascking for > switch command or linux command???? > > Anyway you can use almost all kind of switch > > cheers > > -- > > Paolo Riviello > > http://www.paoloriviello.com > E-mail: [EMAIL PROTECTED] > E-mail & msn: [EMAIL PROTECTED] > Skype: pao_rivi > > If men could get pregnant, abortion would be a sacrament. -H- > > > > > > >From: Eusebio López <[EMAIL PROTECTED]> > >To: <[email protected]> > >Subject: [c-nsp] Bonding > >Date: Tue, 17 Apr 2007 13:34:01 +0200 > > > >Hi, > > > >I want to make bonding between linux and switch. > > > >I need that switch is Cisco? > > > >That commands I must use? > > > >Could use switch allied telesyn? > > > >Cheers > > > > > > > >_______________________________________________ > >cisco-nsp mailing list [email protected] > >https://puck.nether.net/mailman/listinfo/cisco-nsp > >archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _________________________________________________________________ > Hotmail 1 GB: ancora più spazio per i tuoi messaggi e foto! GRATIS! > http://specials.it.msn.com/hotmail.aspx > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
