2007/4/23, Andrew Degtiariov <[EMAIL PROTECTED]>: > Hi guys > > I have been configured policy-map on routed interface on Catalis 6000 > running IOS (native mode). > Here is output of the 'sh policy-map int Fa6/9' command: > > FastEthernet6/9 > > service-policy input: INET-2M > > class-map: class-default (match-any) > 3469423 packets > 5 minute offered rate 32 pps > match: any > police : > 2000000 bps 2000000 limit 2000000 extended limit > aggregate-forwarded 3469423 packets action: set-dscp-transmit > exceeded 0 packets action: drop > aggregate-forward 49 pps exceed 0 pps > > Does a word "aggregate-forwarded" mean that the policy-maps on routed > interfaces is aggregate? I mean if I have INET-2M attached to 2 or > more routed interfaces the bandwidth will share between these > interfaces?
After reading some docs from cisco.com making question more accurate: does the service police on routed interface on Catalist 6000/6500 platform is aggregated per-port per-VLAN or not? -- Andrew Degtiariov DA-RIPE _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
