If it's a 64 mb flash card, you need to have version 7.1.1 ROMMON on the Sup2.
Chuck -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick Kunkel Sent: Wednesday, April 25, 2007 7:04 PM To: [email protected] Subject: [c-nsp] MSFC2 can't see Sup2 sup-slot0: Have people run into this before? Either I'm doing something really stoopid, or my Googling skills are lacking... Or else it just doesn't happen often... I have a 6509 with a Sup2. i'm trying to convert from hybrid mode to native IOS mode. All seems pretty much OK, except for a couple of things. First, the Sup2 seems to prefer if you call the PCMCIA Flash "disk0:", not "slot0:", like all the documenation suggests. I can deal with this... Second, my MSFC2 just won't see the Sup2's PCMCIA Flash or Sup2's bootflash, which as far as I can tell, should be addressable by "sup-slot0:" and "sup-bootflash:", respectively. The MSFC2 is currently running the MSFC2 ver of 12.1(8b)E20. The Sup2 is running CatOS 8.8-4-1. I'm trying to get IOS 121-19.E1 on the things. I get it onto the Sup2 disk0: (or slot0:...whatever), put the sup2 into rommon mode, and boot it, but then when I get into the msfc2 rommon mode, i can't read the blasted slot. Many thanks for a tip to get me past this simple step... Thanks, Rick Kunkel _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
