On Thu, Apr 26, 2007 at 03:24:53PM -0400, Paul Stewart wrote: > Hi folks... > > I'm trying to bring up a pair of new OSPF connections and can't figure this > out.. we do these connections all the time so scratching my head.... > > Cisco 1811 at customer site connected via 2 ethernet connections (bridged > DSL) back to 6500 switches here (each VLAN goes to a switch). This is a > pretty typical setup for us, except this one doesn't work for some > reason.... > > 1811 Config: > > interface FastEthernet0 > description VLAN205 > ip address xx.xx.xx.26 255.255.255.248 > speed 100 > full-duplex > ! > interface FastEthernet1 > description VLAN206 > ip address xx.xx.xx.162 255.255.255.248 > speed 100 > full-duplex > > interface Loopback0 > description OSPF Loopback > ip address xxx.xxx.xxx.5 255.255.255.255 > > > router ospf 1 > router-id xx.xx.xx.5 > log-adjacency-changes > redistribute connected subnets > network xx.xx.xx.24 0.0.0.7 area 0 > network xx.xx.xx.160 0.0.0.7 area 0 > > > 6500 Configs: > > interface Vlan205 > description xxxxxxxxxxxxxxx > ip address xx.xx.xx.25 255.255.255.248 > > router ospf 1 > router-id xx.xx.xx.161 > log-adjacency-changes > redistribute connected subnets > redistribute static subnets > network xx.xx.xx.24 0.0.0.7 area 0 > > > ----------- > > interface Vlan206 > description xxxxxxxxxxxxxxxxxx > ip address xx.xx.xx.161 255.255.255.248 > > router ospf 1 > log-adjacency-changes > redistribute connected subnets > redistribute static subnets > network xx.xx.xx.160 0.0.0.7 area 0 > > > > There is no problem pinging across both interfaces etc..... but OSPF will > not come up at all....
multicast filtered out by the DSL modems? Have you tried to bring up OSPF adjacencies with "neighbor" statements? regards. -- Philippe Strauss av. de Beaulieu 25 1004 Lausanne http://philou.ch _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
