Ahmad Cheikh-Moussa wrote: > Hi! > > I've got a WIC-1ADSL in a 2811 Router. I have a DSL Connect from > Deutsche Telekom, I try to configure it, but the atm interface does not come > up. Ist this config correct ? <SNIP>
> > When I plug in another external dsl modem, then I get a sync from > the dsl modem, so the line works. Any ideas why the interface does not come > up ? > > If you get sync using a different brand of DSL router, you probably have a DSL firmware issue. No idea why the Cisco's are so bad with this. Check out the firmware in this link, I think it is valid for the WIC-1ADSL - the .doc files have install instructions. I've used the firmware several times to fix similar issues. ftp://ftp-sj.cisco.com/pub/access/800/ -dallas > Regards, > Ahmad > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
