Hi Christian, Christian Zeng wrote: > * Ahmad Cheikh-Moussa <[EMAIL PROTECTED]> wrote: >>> When I add vpnclient management clear to my vpnclient config, then >>> everything >>> works. Is this a new feature ? > > http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html#wp1001074 Thanks for the link. This makes a more clear.
> >> One another question. The output of the show crypto isakmp sa has changed. >> With 6.x, if a tunnel is established, the state were QM_Idle. >> Now with 7.x it is AM_Active. On an IOS Router it is still QM_Idle. > > AM denotes Aggressive Mode exchange, QM means Quick Mode. Depending on > what the initiator proposes and what the resonder is willing to accept, > AM may be used for establishing IKE SA. This may be the case when you > want to establish Lan-2-Lan tunnels with preshared keys when the remote > end has dynamic IP addresses. ok, but why active and not idle ? Why shows the ASA AM_Active and the IOS Gateway qm_idle ? On both I used the command "show crypto isakmp sa". Regards, Ahmad -- Ahmad Cheikh-Moussa ISP-Technik NetUSE AG Dr.-Hell-Straße, 24107 Kiel, Germany Telefon: +49 431 2390 400 -- Telefax: +49 431 2390 499 Service: [EMAIL PROTECTED] -- http://NetUSE.DE/ Vorstand: Andreas Seeger (Vorsitz), Dr. Roland Kaltefleiter, Dr. Jörg Posewang Aufsichtsrat: Detlev Hübner (Vorsitz) Sitz der AG: Kiel, HRB 5358 USt.ID: DE156073942 Diese E-Mail enthält vertrauliche oder rechtlich geschützte Informationen. Das unbefugte Kopieren dieser E-Mail oder die unbefugte Weitergabe der enthaltenen Informationen ist nicht gestattet. The information contained in this message is confidential or protected by law. Any unauthorised copying of this message or unauthorised distribution of the information contained herein is prohibited. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
