Kevin, That make sense. Now how can I route certain ip's or subnets to this gateway? On the lan port f0/0 i already have a route-map called "inet" that sets the next-hop behavior for subnets. When I create a sequence in the "inet" route-map that permits a certain ip and sets the next-hop to the gateway on the vlan303(64.x.x.3) it does not work.
Thanks, Dan. Kevin Graham wrote: > On 4/30/07, Dan <[EMAIL PROTECTED]> wrote: > >> interface FastEthernet0/3/3 >> switchport access vlan 303 > [...] >> route-map nat-wb permit 10 >> match interface FastEthernet0/3/3 > [...] >> interface Vlan303 >> ip address 64.x.x.1 255.255.255.240 > [...] >> ip nat inside source route-map nat-wb interface FastEthernet0/3/3 >> overload > > Fa0/3/3 is a switchport, you want to overload onto the SVI (vlan303). > route-map nat-wb should also match the SVI, not the switchport. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
