Josh wrote:
> I saw a post here awhile back about connecting the aux
> port to console port to avoid using a term server, but
> cannot find it now.
> 
> Based on the docs that I can find, it looks like I
> should be using a rollover cable (got that), configure
> the aux port (8N1, no flow control, 9600, modem
> inout(?) -- got that), and go...
> 
> However it isn't working.  Does anyone have a pointer?

Also configure "no exec" and "transport input telnet".  You also might 
want "session timeout 30" or similar so that the port doesn't get wedged 
if you lose connectivity to the router.

Then telnet to the router, port 2001 usually, but in reality 2001 + 
number of async lines that the chassis may have.  Do a "show line" and 
add 2000 to the line number to the left of "AUX".

You should now see the console of the unit connected to the router's AUX 
port.

Also Google "reverse telnet" if this isn't sufficient to get you going.

--
Jay Hennigan - CCIE #7880 - Network Engineering - [EMAIL PROTECTED]
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to