On Tuesday, 1 May 2007 at 15:25:47 +0100, Paolo Lucente wrote: > Hi Nikolay, > it reports you that the cache in which NetFlow data are stored is full. > Depending on the architecture and the available options you can: > > * enable flow aggregation > * raise the number of cache entries > * play with the flow/cache timeouts
Thanks Paolo. Do you know how to raise the number of cache entries? It looke like there is no "ip flow-cache entries" command on 4507 > > Hope this helps. > > Cheers, > Paolo > > On Tue, May 01, 2007 at 11:07:42AM +0300, Nikolay Pavlov wrote: > > Hello folks. Did some one know how to prevent this: > > > > %C4K_HWNETFLOWMAN-4-FLOWSLOSTERR: Netflow stats lost either due to > > %hardware hash collisions or full hardware flow table. Stats lost for > > %150958 packets. > > > > This is Cisco 4507 with WS-F4531 Netflow Services Card > > > > -- > > ====================================================================== > > - Best regards, Nikolay Pavlov. <<<----------------------------------- > > ====================================================================== > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- ====================================================================== - Best regards, Nikolay Pavlov. <<<----------------------------------- ====================================================================== _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
