When installing a 10G interface, we tried copying the ipv6 address from the GigaE port: ipv6 address 2001:xxx:0:B::1/64 IOS 12.2(18)SXE6b says: 2001:xxx:0:B::1/64 can not be configured on TenGigabitEthernet10/1, in use The new 10Gig port is in shutdown. Makes no difference if we try copying the ipv6 address to a 10G or GigaE port. Same result. This does work with IPv4 and IOS just gives a warning like: xxx.139.185.0 overlaps with GigabitEthernet9/20 but does do the ip address set since the interface is in shutdown.
Is this a feature of ipv6 or a bug? Thanks, Hank _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
