hello, what type of L3 switches / routers do you use (paste here IOS too) ? what are the intervals that the BGP session goes up and down ? are you 100% sure the problem is generated because of the overloaded link ? paste here please the output of the command: "sh ip bgp nei <IP>" for both neighbors. do you have a CPU graph for your devices ? what value is the CPU load when sessions goes down ? what about system MTU on both devices and MTU on the neighbors interfaces ?
we wait for more details to help you further, -- liviu. ----- Original Message ----- From: "Donato Dunguihual" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, May 14, 2007 11:38 PM Subject: [c-nsp] BGP and full traffic overload > Hi, > > I have a bgp peering over full traffic overload link, the bgp session > up and down frequently. I think that is for traffic overload .I'm > looking for a way to reserve > a minimal bandwidth for bgp messages,. QOS or SPD are two options. > Does anybody knows how to configure this for another way? > > > Thank You > Donato > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
