hello, did everybody use the same vlan id on both ends of the "vlan based eompls tunnel" ? is anyone here that use different vlans, who can give me an answer to my question ?
thanks, liviu. On Tuesday 15 May 2007 15:34, [EMAIL PROTECTED] wrote: > hello, > > topology: > Host1 --> switches -->PE --eompls--PE <-- switches <- Host2 > > config PE (7604 sup 720 / IOS SRA3): > subinterface + encapulation dot1q vlan X + xconnect (MUX-UNI) > > problem: > if vlan X for Host1 is different then vlan X for Host 2, on the first > switch connected directly to PE we will have STP bloking state at VlanX. > > questions: > is there a possibility to solve that, except "spann disable on vlan X" > or "spann bpdu filter enable" on switches, or the same vlan X on both ends > ? can i filter somehow bpdu throught the eompls tunnel ? > > thank you, > liviu. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
