I have a 3845 running 12.4(9)T1 (advipservicesk9-mz if it matters) and am trying to get ipv6 running on a bvi:
interface BVI2 ip address 10.250.2.254 255.255.255.0 ip access-group into-corp out ip nat inside ip inspect Inside in ip virtual-reassembly ipv6 address 2001:470:1F01:3521:1981:200:0:1/96 ipv6 enable bridge 2 protocol ieee bridge 2 route ip I can source ping packets from that interface to remote sites but I can't ping locally attached machines on either their link-local addresses or manually configured (auto-configuration isn't working either). On other routers (6500s) I can ping link-local addresses just fine so I should expect that to work here too. I can't tell if my config's wrong or it's a bvi & v6 support issue. Anyone know? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
