Hi,
On Wed, May 16, 2007 at 09:12:47AM -0700, Rick Kunkel wrote:
> Here's the bonehead part. Would the standard way to deal with routing
> between these be to make a VLAN Interface on the 6509? I made a VLAN 12
> interface and gave it the IP address 2.2.2.1. Works great.
That's the way to do it :)
The vlan interface is "the routing module's connection into the L2 VLAN"
(otherwise you'd just have a switched VLAN, and no connection to the
"router side" of this box).
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [EMAIL PROTECTED]
fax: +49-89-35655025 [EMAIL PROTECTED]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
