-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Take a look at the PPS in "show platform hardware capacity" at peak hours, when you start reaching 5-10mpps (depending on your application) you should start thinking about adding DFCs. Also check the bus utilization if you have non-fabric cards in the system. Mixing fabric cards and non fabric cards is a really bad idea, as it degrades the performance of the entire switch.
The biggest reason to add DFCs for most people is to get more space for netflow entries. Med vänliga hälsningar Peter Salanki Teknikchef Bahnhof AB (AS8473) www.bahnhof.se Kontor: +46855577132 Mobil: +46709174932 17 maj 2007 kl. 03.55 skrev Chris Woodfield: > "show platform hardware capacity" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (Darwin) iD8DBQFGTNjUiQKhdiFGiogRAgeyAJ93D+e0+XUlShzmwjLgmCHsidt9xgCfVjaK vPvYEC8JWCgrjR8QSlLGluA= =hK2c -----END PGP SIGNATURE----- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
