Hi, Yes it does. You can also configure an inbound route-filter on your RR and then by using bgp rr-group command download it through ORF to your PE's as an outbound filter.
Hope this helps, Jeff > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > [EMAIL PROTECTED] On Behalf Of Denis V. Schapov > Sent: dinsdag 15 mei 2007 14:21 > To: [email protected] > Subject: [c-nsp] MP-BGP, ORF with VPNv4 > > Hi. > > Does Cisco IOS support automatic ORF based on extended-community attribute > (route target) > for MP-BGP/VPNv4 IP sessions/prefixes between PE routers and Route > Reflectors in MPLS VPN > environment ? > I mean RFC 4364, RFC 4684 cooperative route filtering, when PE/RRs don't > send UPDATES for > VPNv4 prefixes to PEs which have no VPN/VRF associated with some route- > targets. > Could you point to documentation or white paper ? > > Thank you. > > > > ---- > Denis V. Schapov > JSC "DSI" > Irkutsk, Russia > [EMAIL PROTECTED] > +7 3952 510506 > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
