MKS, Try booting into rom-monitor and check your boot variables. You may need to do this for both the sp and rp.
Matt __________________________ http://www.invision.net/ _______________________ Matthew E. Martini, PE InVision.com, Inc. (631) 543-1000 x104 Chief Technology Officer [EMAIL PROTECTED] (631) 864-8896 Fax _______________________________________________________________________p gp_ On May 18, 2007, at 8:08 AM, MKS wrote: > Hello list. > > We have been upgrading several sup-720s to SRA2 (from SXE) without any > problems. > > But one particular box is not behaving right. > > Here below is the console output. > > > System Bootstrap, Version 8.1(3) > Copyright (c) 1994-2004 by cisco Systems, Inc. > Cat6k-Sup720/SP processor with 524288 Kbytes of main memory > > Autoboot executing command: "boot disk0:s72033-advipservicesk9_wan- > mz.122-33.SRA2.bin" > Loading image, please wait ... > > > Self extracting the image... [OK] > Self decompressing the image : > ###################################################################### > ############################################## > [OK] > > Restricted Rights Legend > > Use, duplication, or disclosure by the Government is > subject to restrictions as set forth in subparagraph > (c) of the Commercial Computer Software - Restricted > Rights clause at FAR sec. 52.227-19 and subparagraph > (c) (1) (ii) of the Rights in Technical Data and Computer > Software clause at DFARS sec. 252.227-7013. > > cisco Systems, Inc. > 170 West Tasman Drive > San Jose, California 95134-1706 > > > > Cisco IOS Software, s72033_sp Software (s72033_sp- > ADVIPSERVICESK9_WAN-M), > Version 12.2(33)SRA2, RELEASE SOFTWARE (fc4) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2006 by Cisco Systems, Inc. > Compiled Thu 30-Nov-06 14:12 by prod_rel_team > Image text-base: 0x401012FC, data-base: 0x41608000 > > > 00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console > debugging > output. > > 00:00:05: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor > > 00:00:07: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console > debugging output. > > 00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to > ensure > console debugging output. > > 00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route > processor > > > > System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1) > TAC Support: http://www.cisco.com/tac > Copyright (c) 2004 by cisco Systems, Inc. > Cat6k-Sup720/RP platform with 524288 Kbytes of main memory > > > > Then it just stops. > > > > Can someone recommend steps to debug this issue? > > Regards > MKS > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
