On Tue, 22 May 2007, matthew zeier wrote: > I do have that - as mentioned earlier I probably need to use a /64 for > the interface. Unfortunately, I was only allocated a /64 from he.net.
You should try to get at least a /48 since you're not just a simple end-site. In the meantime, you could convert VLAN5's IPv4 address to a 6to4 address on that same interface. Make sure you have a 6to4 relay somewhere in your network though. Or, just run 6to4 directly on the Linux box: In /etc/sysconfig/network: NETWORKING_IPV6=yes IPV6TO4INIT=yes IPV6_DEFAULTDEV=tun6to4 In each /etc/sysconfig/network-scripts/ifcfg-*: IPV6INIT=yes Antonio Querubin whois: AQ7-ARIN _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
