Mad Unix wrote: > Out of your experience people... > I am in the process of planning and design a good server room, > there are standards for constructing server rooms...please your input in > this issue > How to design a good server Room?
Since you didn't specify a size, etc. A good place to start: http://www.apcc.com/products/family/index.cfm?id=261 Ignore the noise about raise floor (overrated and expensive), and you don't need "high ceilings" anymore. 9-10ft would be ample depending on your rack densities and return air/plenum requirements. Advice; have plenty of power available, 480-600v 3phase power if possible. Also, build on a slab to avoid loading requirements in high rises; stuff gets heavy fast. Then again, if you're looking at something where you want 40-100 racks of 10KW per reack, you're looking at something rather huge and everything changes. ie: megawatt UPS's, 150KW PDU's, etc. -- Robert Blayzor, BOFH INOC, LLC rblayzor\@(inoc.net|gmail.com) PGP: 0x66F90BFC @ http://pgp.mit.edu Key fingerprint = 6296 F715 038B 44C1 2720 292A 8580 500E 66F9 0BFC Email is packaged by intellectual weight, not volume. Some settling of contents may have occurred during transmission. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
