I will enhance this with show logging | begin ^000699 :)
Ed Ravin wrote: >> On Thu, May 24, 2007 at 05:26:01PM +0300, Tassos Chatzithomaoglou wrote: >>> I was wondering.... >>> >>> Is there a way to display the x last lines of the log of a router (through >>> the cli) ? >>> Like the CatOS "sh logging buffer -x" is doing. > > Or like the Unix "tail" command? Apparently not. But here's a really, > really, really ugly way to simulate it: > > In your config, put: > > service sequence-numbers > > And then, if you know the sequence numbers of the last few messages, > you can ask to see the last few messages via regexp: > > Router#show logging | inc (0700|0699): > 000699: .May 24 10:54:19: %SYS-5-CONFIG_I: Configured from console by admin > on vty0 (10.10.10.10) > 000700: .May 24 10:54:26: %SYS-5-CONFIG_I: Configured from console by admin > on vty0 (10.10.10.10) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
