I'd guess (since I haven't explicitly testing that exact combination) less than 10%. If it's at high rates with a shaper activated it may be more.
Rodney On Thu, May 31, 2007 at 09:46:34AM -0300, Sean Watkins wrote: > Very small - say one class policing on a /24, and another class priority > on dscp. > > > -- > Sean Watkins > North Rock Communications > Phone: 441-540-4102 > > > > -----Original Message----- > > From: Rodney Dunn [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, May 30, 2007 4:35 PM > > To: Sean Watkins > > Cc: [email protected] > > Subject: Re: [c-nsp] How much will a service policy kill a router? > > > > Impossible to answer without knowing the full classification > > model you use. > > > > thousdand line acl's...hit is a lot. > > > > short acl's .... smaller. > > > > > > 12.4(11)T ...large hit until we fix some of the problems we > > caused with a new classification infrastructure. > > > > On Wed, May 30, 2007 at 02:51:20PM -0300, Sean Watkins wrote: > > > Hi, > > > > > > Quick question - in others experience here, adding a > > service policy to > > > a 7200 with NPE-G1, running at a good 80-90 MB/s, how much will it > > > kill it? The box sits at about 30% load constantly. > > > > > > > > > Sean > > > _______________________________________________ > > > cisco-nsp mailing list [email protected] > > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
