Looking through the installation guide, the 6000W/8700W are "supported" but are limited to 4000W in the 6509-NEB-A
So I guess that'd make the NEB-A looking more like a non -E based design. ~Matt -----Original Message----- From: Gert Doering [mailto:[EMAIL PROTECTED] Sent: Saturday, June 02, 2007 12:19 PM To: Matt Addison Cc: Gert Doering; Simon Hamilton-Wilkes; [email protected] Subject: Re: [c-nsp] APC Cabinets with SIde Air Distribution Hi, On Sat, Jun 02, 2007 at 12:16:58PM -0400, Matt Addison wrote: > What's the difference between the E and non E variant? More powa, faster backplane (if I'm informed right) on the 6513E. > From what I can tell the only difference seems to be the up to 6k PSU, There's a 10k PSU for the "E" :-) - but indeed, 6k would be very much sufficient for us, using 2x 1300W today. gert -- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany [EMAIL PROTECTED] fax: +49-89-35655025 [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
