Hello list, I have the following issue with a 7600/WS-SUP720-3BXL (12.2(33)SRA3). I only see hits on the ingress flow-sampler map and "no" hits on the egress map?
I have configured netflow like this: interface Vlan208 description "Blaat" ip address 123.456.789.0 255.255.255.252 no mls ip no mls switching unicast flow-sampler ingress_Vl208 flow-sampler egress_Vl208 egress end I want to see AS info, so thats why the "no mls switching unicast" is configured (this way routing is done in software and not in hardware). blaat#show flow-sampler Sampler : egress_Vl208, id : 3, packets matched : 31, mode : random sampling mode sampling interval is : 1000 Sampler : ingress_Vl208, id : 4, packets matched : 17608654, mode : random sampling mode sampling interval is : 1000 My guess is that the egress traffic is using mls... I hope someone has any suggestions... Thanks in advance! Koen _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
