On Wed, Jun 06, 2007 at 07:41:40AM -0500, Justin Shore wrote: > To add to Zahid's question with a question of my own, does anyone have > any OIDs for monitoring TCAM usage via SNMP? I have a pair of 3BXLs > with full tables that I'd like to keep an eye on.
A walk of .1.3.6.1.4.1.9.9.97.1.9 on SXF7 gives... .1.3.6.1.4.1.9.9.97.1.9.1.1.2.3021.1 = "Security Acl Mask Tcam Usage on module 5" .1.3.6.1.4.1.9.9.97.1.9.1.1.2.3021.2 = "Security Acl Value Tcam Usage on module 5" .1.3.6.1.4.1.9.9.97.1.9.1.1.2.3021.5 = "Qos Acl Mask Tcam Usage on module 5" .1.3.6.1.4.1.9.9.97.1.9.1.1.2.3021.6 = "Qos Acl Value Tcam Usage on module 5" .1.3.6.1.4.1.9.9.97.1.9.1.1.2.3021.9 = "Layer 4 Port Operator Tcam Usage on module 5" .1.3.6.1.4.1.9.9.97.1.9.1.1.2.3021.10 = "Inteface Mapping Tcam Usage on module 5" .1.3.6.1.4.1.9.9.97.1.9.1.1.3.3021.1 = Gauge32: 11 .1.3.6.1.4.1.9.9.97.1.9.1.1.3.3021.2 = Gauge32: 60 .1.3.6.1.4.1.9.9.97.1.9.1.1.3.3021.5 = Gauge32: 7 .1.3.6.1.4.1.9.9.97.1.9.1.1.3.3021.6 = Gauge32: 32 .1.3.6.1.4.1.9.9.97.1.9.1.1.3.3021.9 = Gauge32: 0 .1.3.6.1.4.1.9.9.97.1.9.1.1.3.3021.10 = Gauge32: 8 .1.3.6.1.4.1.9.9.97.1.9.1.1.4.3021.1 = Gauge32: 4096 .1.3.6.1.4.1.9.9.97.1.9.1.1.4.3021.2 = Gauge32: 32768 .1.3.6.1.4.1.9.9.97.1.9.1.1.4.3021.5 = Gauge32: 4096 .1.3.6.1.4.1.9.9.97.1.9.1.1.4.3021.6 = Gauge32: 32768 .1.3.6.1.4.1.9.9.97.1.9.1.1.4.3021.9 = Gauge32: 128 .1.3.6.1.4.1.9.9.97.1.9.1.1.4.3021.10 = Gauge32: 4096 Notice the lack of the "normal" (FIB) TCAM you would probably be caring about. Also "9" doesn't exist under ".1.3.6.1.4.1.9.9.97.1" according to the SNMP Object Navigator. U-hu. Anyone found anything better than "show platform hardware capacity forwarding" if you have it, or comparing "show mls cef summ" to "show mls cef maximum-routes" if you don't? -- Euan Galloway _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
