Hi All, Given the config below for a vpn tunnel, when I add the command "qos pre-classify" to the crypto map and the tunnel interface, I get really bad slowdown of traffic.
2. Questions, is anybody using qos pre-classify to prioritise voice? And I just wonder if trying to shape the tunnel and shape the phyiscal interface is wrong. thanks policy-map LLQ class voice priority 2000 class class-default fair-queue policy-map shape class class-default shape average 2000000 service-policy LLQ crypto map GRE 10 ipsec-isakmp set peer yyy.yyy.yyy.38 set transform-set myset1 match address 101 interface Tunnel0 ip address 10.1.0.2 255.255.255.252 tunnel source xxx.xxx.xxx.130 tunnel destination yyy.yyy.yyy.38 service-policy output shape ! interface FastEthernet0 description wan interface ip address xxx.xxx.xxx.130 255.255.255.252 ip nat outside crypto map GRE service-policy output shape -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender. Any offers or quotation of service are subject to formal specification. Errors and omissions excepted. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Lumison, nplusone or lightershade ltd. Finally, the recipient should check this email and any attachments for the presence of viruses. Lumison, nplusone and lightershade ltd accepts no liability for any damage caused by any virus transmitted by this email. -- -- Virus scanned by Lumison. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
