Phil Bedard wrote: > Your answers mean that the LAN-type GigE on the 7600 series > is probably not what you want. > Some of those cards are oversubscribed (IE, there are 24 GigE > ports handled by 2 10-gig ASICs.) and they don't do shaping. > > While it's very new, the ES20 20-port GigE blade for the 7600 > I think is the cheapest option to get what you want, unless > you need IPV6/mVPN/ 4364VPN support, which adds to the cost > via a license.
Possibly a cheaper option is the 7600 with SIP-200 and FE SPAs or SIP-400/SIP-600 with FE or GE SPAs where shaping is needed. >From memory there is some level of oversubscription with the SIP's also but I don't recall finding any clear documentation on this. Use standard FE/GE blades where you don't need advanced QoS - the SIPs & SPAs are just too damn expensive! Also bear in mind that if you go up to the SIP-600, Sup/RSP720 is Required. Regards, Brad _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
